Feature:
● This control board is a 32-bit MCU control board, which runs faster, the maximum no-load speed reaches 40000mm/min, the algorithm is optimized better, the vibration is smaller when the machine moves at high speed, and the performance is more stable;● Using the Type-C USB interface, it is more convenient to use and the data transmission is more stable;● One-piece integrated drive● PWM output frequency 10kHz, higher engraving precision and clearer details● Y-axis dual drive, stronger drive capability;● Support USB automatic identification, when plugged in USB and connected to the computer, the offline interface is automatically shielded to avoid offline interference with data;● 5V power output port, and software controllable, easy to expand various functions;● Support USB flash firmware, firmware upgrade is more convenient;● XY limit switch interface each● Self-contained laser anti-burn mode, laser S value >=100, after the laser is turned on, if there is no movement within 5S, an alarm will occur● Type 4540 - with a gyroscope module that can detect the movement of the machine during the engraving process, preventing someone from moving the machine
Packing List 1:Control Board + Type-C Cable

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.