GA24Y-370 Planetary Reduction Motor DC6V12V24V Reduction Large Torque Reversible
$21.87

GA24Y-370 is a 24mm outer diameter planetary gear DC brushed reduction motor. The 370 motor body is matched with a precision planetary gearbox, which is compact and compact in size. The planetary transmission efficiency is high, the output torque is large, and the operating noise is low. It supports PWM speed regulation, forward and reverse rotation, occupies small space, and has stable transmission. It is widely used in robots, smart homes, instrument equipment, maker DIY, small automation actuators, and can be adapted to sample testing and batch equipment一、ParameterBrand: ZENG WHCDModel: GA24Y-370Motor type: DC brushed planetary reduction motorRated voltage: DC6V/12V/24VOuter diameter of gearbox: 24mmOutput shaft: Φ 6mm D-shaped shaftIdle speed: 12RPM-2125RPM (varies with voltage and speed ratio)Maximum stalling torque: 25KG. CM (high speed ratio condition)Shell material: Aluminum alloy gearbox shellApplicable operating conditions: intermittent work, short-term mild continuous operationTip: The larger the reduction ratio, the lower the speed and the greater the torque; Planetary gears do not have self-locking function, and external force can rotate the output shaft; Long term stalling operation is prohibited.二、Detailed explanation of internal materials and processes1. Motor stator and rotorHigh purity copper winding, with regular winding, low internal resistance, and low working temperature rise; High performance permanent magnet steel with stable magnetic field and uniform torque output; High quality wear-resistant carbon brush reduces commutation sparks and extends the service life of the motor.2. Planetary gear transmission systemThe sun gear, planetary gear, and internal gear ring are all made of high-strength alloy steel with surface hardening treatment; The planetary carrier is precision machined with multiple rows of star wheels meshing simultaneously, resulting in dispersed forces, high transmission efficiency, low operating noise, and resistance to frequent forward and reverse impact loads.3. Bearing structureThe output end is equipped with ball bearings to reduce shaft friction, minimize radial play, and enhance the ability to withstand radial forces.4. Gearbox housingAluminum alloy shell integrated molding, good rigidity, auxiliary heat dissipation, not easily deformed; Internally filled with high-temperature resistant and long-lasting lubricating grease, pre lubricated at the factory, no need for secondary oiling for normal use.5. Output shaft machining45 # steel output shaft, CNC precision milling D-shaped flat position, precise tolerance, locking coupling without slipping or rotation.三、Applicable scenarios-Robot Maker: Small robot joints, intelligent car chassis, gimbal rotation, graduation design, DIY development projects-Smart home: smart door lock, small electric flip cover, display turntable, small household appliance drive module-Instrument and equipment: experimental testing fixtures, medical small equipment, security equipment, office small actuators-Automation equipment: micro valve drive, small conveying mechanism, advertising rotating device-Amusement equipment, various small intelligent equipment power units四、Installation and usage precautionsElectrical use1. It is strictly prohibited to directly connect the DC brushed motor to the microcontroller IO port drive. It must be paired with an H-bridge drive board, otherwise the main control chip will be burned.2. Strictly supply power according to the rated voltage on the nameplate, and prohibit overpressure use. Overvoltage will cause overspeed operation, increase heating, and shorten the service life of the entire machine.3. Long term stalling is prohibited as the stalling current increases sharply, which can easily burn out the motor winding and drive module; Suggest adding limit protection to the entire machine.
Mechanical Installation1. Use M2.5 screw holes on the end face of the gearbox for fixation, with a flat installation surface and evenly tightened screws to avoid distortion of the housing causing abnormal gear noise and wear.2. When assembling the coupling and disc, it is forofferden to violently strike the shaft end. Use a locking coupling press fit for assembly.3. The output shaft only transmits torque and cannot be used as a load-bearing support shaft; Install the load as coaxially and concentricly as possible to reduce eccentric vibration.4. Avoid excessive radial lateral force on the output shaft, as excessive lateral force can exacerbate gear and bearing wear and increase operating noise.
Environment and lifespan1. Suitable for indoor conventional environments, long-term immersion in water, strong corrosion, and high dust conditions are prohibited; It is recommended to add a protective shell in humid environments.2. Suitable for intermittent work; If long-term continuous operation is required, the actual load should be lower than the rated torque, reserve heat dissipation space, and do not completely enclose the motor.3. The gearbox has been lubricated before leaving the factory. Please do not disassemble it without authorization, as the warranty will be lost after disassembly.
Selection Tips1. The planetary gearbox does not have self-locking effect. After shutdown, the output shaft can rotate under external force. To maintain its position, an external brake or mechanical limit should be applied.2. Choose a torque reserve of 1.2-1.5 times, and do not directly use the locked rotor torque as the normal working torque.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.