Furrion FOS05TAEN Vision S 3-Camera System w/ 5" Monitor

Product highlights

What\'s in the box

• 5\" Touchscreen monitor w/ built-in 3.5\" antenna
• Sharkfin doorway/rear camera (attached 3\" cable with 3.5mm TRS connector)
• Rubber mounting gasket (pre-installed on camera base)
• 2 Side camera/marker light assemblies w/ attached 8\" input wires
• 2 Rubber gaskets (pre-installed on side-cameras)
• 4.25\" Camera antenna
• Suction-cup monitor mount
• Table-top monitor mount
• 80\" Sharkfin camera power cord (female 3.5mm jack on one end / bare-ended wires on other end)
• DC Lighter adapter with 5\" female DC socket and 6\' cord terminated in a male DC plug
• Eight 1/4\" screws
• Side camera/marker light instructions
• Monitor instructions
• Sharkfin camera instructions
• Warranty leaflet (Eng/Span/Fren)
• Barcode sticker w/ model# and serial#

Written by Crutchfield\'s Jon Paul

When you\'re piloting an RV, camper rig, or commercial vehicle, seeing what\'s around you is almost as important as seeing the road ahead. The Furrion Vision S FOS05TAEN 3-camera marker light system gives you clear views of what\'s going on whether you\'re on the road or in the campground.

This complete kit includes a rear sharkfin camera and two side cameras that replace your vehicle\'sexisting marker lights. Each camera/light combo sends a wireless high-resolution live-stream image to the 5" touchscreen display, which can display up to four camera images at once.

The side cameras give you 65-degree images, while the rear camera provides a 120-degree view. The monitor\'s anti-glare screen supplies clear images to help you maneuver safely, while the built-in motion sensors, rear-assist marker lines, and night-vision view provide additional safety and security.

The monitor comes with a windshield mount and a table stand, so you can move it to where you need it. The cameras are IP65 waterproofand they\'re all built tough for life on the road.

Note: Not compatible with Furrion Vision 1 or Vision 2 systems.