INTBUYING® Full Automatic Sealing and Cutting Machine | Technical Documentation INTBUYING®Full Automatic Sealing and Cutting Machine Shrink Film Packaging Machine 220V
The automatic L-type sealing and cutting machine is an efficient and intelligent packaging device, integrating automatic feeding, L-type sealing and cutting. Designed for mass production packaging assembly lines, it can be used in conjunction with a heat shrink packaging machine to form stable and attractive package units.
Equipped with film frame system, automatic feeding conveyor belt, sealing and cutting device, temperature control system, photoelectric detection system, and control system, it improves packaging efficiency, operation automation, and package uniformity while saving packaging materials and time.
- Sealing knife: Teflon-coated anti-adhesive high-temperature-resistant aluminum alloy knife. Ensures no cracking, no coking, no smoke, zero pollution. Features automatic protection function.
- Digital display temperature controller with PID function. Temperature is sensitive and accurate, can be set arbitrarily.
- Automatic feeding with length adjustment via photoelectric sensor and timer combination.
- Can be connected with production line for automatic operation.
- Original imported electrical components to reduce faults.
- Automatic and manual modes can be switched at any time.
Product Parameters ModelFQL-450 Voltage220V 60Hz 1-phase Power1.6Kw Conveyor load15-20kg (33.1-44.1LBs) Sealing and cutting speed15-25 bags/min FilmPOF Available air source0.4-0.6Mpa Width of conveyor belt330mm (13in) Maximum packaging sizeLength + Height ≤ 500mm (19.7in)
Width + Height ≤ 400mm (15.7in)
Opening height ≤ 150mm (5.9in) External machine60L air pump Machine size166x88x149cm (65.3x34.6x58.7 inches) Net weight277.5kg (611.8LBs) Attention
- The machine must be reliably grounded to ensure personal safety.
- All pneumatic components and cylinder speeds are preset at the factory. Users are advised not to adjust independently. If necessary, perform under guidance of technical personnel with pneumatic expertise.
- If pneumatic system loses pressure, sealing and cutting blade assembly may descend automatically. This is normal.
- During operation, do not contact moving parts, especially under sealing and cutting blade.
- When setting sealing temperature, follow principle of starting low and gradually increasing.
- Surface of sealing and cutting blade (arc-shaped) is coated with non-stick film layer. Do not scrape with sharp tools.
- In case of malfunction, immediately cut off power supply.
- Unauthorized modification of electrical wiring by non-professional technicians is strictly prohibited.
- The machine should be used in conjunction with a heat shrink packaging machine.
Features & Advantages Control Panel Compact structure, precise manual/automatic mode control and horizontal/vertical sealing temperature control. Easy and convenient operation. Digital Displayers Sealing and cutting time, stroke and counting digitally displayed and set. Clear display effect, meeting different production requirements. Auxiliary Panel Independent film feeding and sealing/cutting buttons for manual mode. Emergency stop switch for emergencies. High practicality. Advanced Knife Teflon-coated, resistant to adhesion and high temperature. Forms firm sealing lines with longer service life. High Quality Motor Copper motor drives machine smoothly and stably, improving sealing and cutting stability. Conveyor Belt Stable conveying of materials to be packaged. Good conveying effect with adjustable conveying speed. Height Adjusting Handwheel Rotatable to adjust opening triangular plate height for adaptation to different materials. Punching Needle Wheels Used to punch packaging film. Adjustable in position, ensuring effective feeding of heat shrink film. Photoelectric Detector Accurate product detection and positioning. High sensitivity with quick response to instructions. Protective Cover Organic glass protective cover provides safety protection, ensuring personal and operation safety. Waste Film Wheel Collects waste film automatically and orderly, preventing accumulation that affects normal sealing. Supporting Assembly Moving wheels and supporting legs combine to stably support machine body and facilitate movement. Operation Method 1. Operation Preparation
- Confirm air pressure (5-6KG/cm³).
- Turn on side air switch, then power.
- Adjust horizontal sealing temperature to approx. 180°C and vertical sealing temperature to approx. 180°C.
- Set sealing time to 40 milliseconds.
- Install packaging film according to film winding marking diagram.
- After film passes through rollers, triangular plates and feeds into film pulling toothed belt, connect waste to collection tray.
- Perform manual film feeding and manual sealing/cutting 3-4 times to align film.
- Unscrew throttle valve of blue air pipe to blow air into film.
- Switch to manual mode, adjust triangular plate height and conveyor platform width according to product.
- Adjust stroke time according to product.
- After adjustment, turn on automatic mode for automatic product entry and sealing/cutting operation.
2. Operation Steps
- Startup Preparation:
- Connect power supply: AC220V, 60Hz, 1-phase.
- Use safe electricity meeting household/industrial standards.
- Connect air source (air pump) with drying and filtration. Ensure stable air pressure. Recommended: 8mm air pipe.
- Automatic Operation:
- Before automatic mode, set sealing/cutting temperature, time, photoelectric position and rear allowance.
- Select automatic mode button on operation panel.
- Process: Machine starts running, feeding conveyor belt starts. Materials placed on belt, conveyed forward.
- When material detection switch detects materials, discharging conveyor belt starts rotating with stroke counting.
- After stroke completion, discharging conveyor belt stops, sealing/cutting knife works.
- After sealing/cutting time, knife rises to complete cycle.
- Alarm or Abnormality Handling:
- If machine stops due to material jamming, press emergency stop switch, switch to manual mode, remove item.
- If abnormality occurs, press emergency stop button immediately.
Item Number (057204): 1 x Automatic Sealing and Cutting Machine 220V
Ordering Information: You can make order with no worry. Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders processed Monday-Friday; Not on weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for consumables.
Support: We stand behind our products. Even after warranty period, you can seek service or technical support with low cost.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.