Front/Mid/Center/Mid-Rear/Rear Frame Section for 2005-15 Double/Access/Reg Cab

Free Shipping on this item

Model C1489/90/91/92/93

TIEWARDS Front/Mid/Center/Mid-Rear/Rear Frame Section for 2005-15 Double/Access/Reg Cab

Fast Free Shipping

30 Day Return Policy

Full Factory Warranty

Product Details

Note: Any Free Shipping Promotion is Valid to the 48 contiguous states. for Alaska, Hawaii, Puerto Rico, Guam,Virgin Islands and Samoa, extra shipping fee will be charged.

ABOUT THIS ITEMC1489:Front Frame Section Set for Tacoma 2005-2015 Double Cab/Access Cab 2nd Gen Fitment:

We designed our Front Frame Section Set Frame repair kit to repair the Driver and Passenger Sides front frame on the 2nd Gen Tacoma models.
FIT FOR:
Tacoma 2005-2015 2nd Gen Double Cab,
Tacoma 2005-2015 Access Cab 2nd Gen
Superior Material:
Made of premium steel, durable, impact resistance and high strength. Anti-Rust Oil Zinc coated on the surface to prevent rust and prolong the lifespan of this repair kit.
Excellent Performance:
This frame rust repair kit can provide a convenient solution to rust-related issues with your frame, effectively improving its overall performance.
Cost-effective:
This frame section is a direct replacement for the original frame, restoring the ability to securely mount the repair in the frame. The most cost-efficient choice to replace the old rotten frame make your journey safer.
Easy Installation:
1.The Front Frame Section Set will cap the frame beginning right after the control arm crossmember, or 8″ inches before the front cab mount, and will end approximately 13.5″ after the transmission cross member, right where the frame transitions from a boxed style frame to a C-channel style frame.
2. The Front Frame Section Set is 6″ inches tall and once installed will need to be welded to the upper part of the original frame after the rust is removed and remaining metal is cleaned to bare metal.
3.The Front Frame Section Set also have drainage holes designed into them to allow any moisture or debris to drain out of the frame preventing a repeat problem.

Package Included:

2PCS Front Frame Section Set (Driver & Passenger Side)

C1490:Center Frame Section for 2005-2015 Toyota Tacoma Regular (Standard) Cab 2wd &4wd Fitment: Center Frame Section was designed to cap over and repair the center frame on the 2005-2015 Toyota Tacoma Regular (Standard) Cab both 2wd and 4wd models.
Material: They are fabricated from 11 gauge cold rolled steel, CNC cut and MIG welded by our Certified welders. Made from heavy duty steel, Cool Dark Green Colour.which is more anti-rust and better welding effect,prolongs the service life.
Function: Say goodbye to worries about rust damage affecting the structural integrity of your vehicle\'s frame. The Tacoma frame repair features an electroplated coating that not only facilitates easier welding but also provides excellent resistance against corrosion and wear.
Installation: This part is designed to coincide with our jigsaw style weld edges for a seamless fit, and should be welded onto the existing frame along all overlapped edges.
Safety: By repairing rust damage on the front frame section, this tacoma frame repair kit ensures the structural safety of the vehicle, improving the overall driving experience and minimizing potential safety risks.C1491:Mid Frame Section for Tacoma 2005-2015 Reg Cab 2nd Gen/Access Cab 2nd GenFitment:
Tacoma 2005-2015 Access Cab 2nd Gen,
Tacoma 2005-2015 Reg Cab 2nd Gen.
Material:
They are fabricated from 11 gauge cold rolled steel, CNC cut and MIG welded by our Certified welders. Made from heavy duty steel, Cool Dark Green Colour.which is more anti-rust and better welding effect,prolongs the service life.
Feature:
Our Mid Frame Section was designed to fit the 2nd Gen Tacoma Mid-rear frame section where the forward end of the rear leaf spring mounts to the frame. This part begins right at the rear cab mount and ends 12″ after the rear bed mount.
Installation:
The leaf spring mount will need to be removed from the frame by cutting the rivet heads off and drilling them out. Once removed the frame repair section can be installed and your leaf spring mount can be re-attached either with nut and bolts or by welding it back on. The TAC-232X has 3 cut lines in the area of the rear bed mount, giving you the option to notch the frame kit around the rear bed mount if the metal behind it is good.
Note:
This part does not come with the rear spring mount.Comes with a separate plate for the top of your frame, and also has holes cut where the rivets hold on the original spring mount so you can re-mount the spring mount.
Designed to cap over the original frame and weld onto the upper, and lower inner edge, plus forward and rear seems.C1492:Mid-Rear Frame for Tacoma 2005-2015 Double Cab/Access Cab/Reg Cab 2nd Gen NEW Fitment:
This set Fits for
Tacoma 2005-2015 2nd Gen Double Cab,
Tacoma 2005-2015 Access Cab 2nd Gen,
Tacoma 2005-2015 Reg Cab 2nd Gen.
Material:
They are fabricated from 11 gauge cold rolled steel, CNC cut and MIG welded by our Certified welders. Made from heavy duty steel, Cool Dark Green Colour.which is more anti-rust and better welding effect,prolongs the service life.
Feature:
The Mid-Rear Frame begins at the rear fuel tank cross member and is 26.25″ long, and ends just after the spare tire cross members forward mount to the frame. You will need to remove the bump stop mount from your frame before your able to install this frame kit.
Installation:
We’ve designed our Mid-Rear Frame to cap the frame over the rear axle after removing the bump stop and any rust or corrosion. The Mid-Rear Frame caps over the original frame from the outside and is notched to fit right around the driver side upper shock mount, just clamp the frame kit so it fits tightly to the frame, then weld it on.
Protection:
Say goodbye to worries about rust damage affecting the structural integrity of your vehicle\'s frame. The Tacoma frame repair features an electroplated coating that not only facilitates easier welding but also provides excellent resistance against corrosion and wear.C1493:Rear Frame Section for Tacoma 2005-2015 Double Cab/Access Cab/Reg Cab 2nd Gen Fitment: Tacoma 2005-2015 2nd Gen Double Cab, Tacoma 2005-2015 Access Cab 2nd Gen, Tacoma 2005-2015 Reg Cab 2nd Gen.Material: They are fabricated from 11 gauge cold rolled steel, CNC cut and MIG welded by our Certified welders. Made from heavy duty steel, Cool Dark Green Colour.which is more anti-rust and better welding effect,prolongs the service life. Function: Our Rear Frame Sections can be used to cap over the original frame or can also be used to replace the rear frame end. It was designed to cap the rear end of the frame starting half way through the spare tire cross member and extending 24.25″ to the rear end of the frame. The Rear Frame Sectionhas holes cut into it for installing the leaf spring hangers, and also bolting on the rear bumper.Installation: To install you will need to remove the rear bumper brackets from the frame and remove the rear leaf spring hangers by cutting/drilling out the rivets, then re-install the spring hangers after the Rear Frame Sections are welded to the frame.Protection:Say goodbye to worries about rust damage affecting the structural integrity of your vehicle\'s frame. The Tacoma frame repair features an electroplated coating that not only facilitates easier welding but also provides excellent resistance against corrosion and wear.ABOUT US


Why Shop With Us?SHOP WITH CONFIDENCECompetitive pricing and manufacturer warranty on the products we sellFAST FREE SHIPPINGMost orders ship within one business day via Fedex ground.WORLD CLASS CUSTOMER SERVICEOur support agents are here to assist you, Monday through Friday.30 DAY RETURN POLICYWe want you to be satisfied with your order, and accept returns up to 30 days after purchase.Shipping

Attention to customers from California:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

All orders will be shipped out within 1 business day after payment is cleared. Most of orders will be shipped out at the same day if ordered before 8:00 AM PST(Pacific Standard Time) during business days.All orders will be shipped out via USPS or UPS or Fedex express with a tracking number, which will take 2-7 business days for the delivery.The freight cost listed in the sale will be for domestic 48 states only. For customers from Guam, Puerto Rico, Northern Mariana Islands, Virgin Islands, Marshall Islands, Alaska or Hawaii, please kindly message us for an accurate quotation.We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.We only ship to Paypal confirmed address, please make sure that the address is correct before you check out.

Returns

30 Days Return and Money Back

If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee.Kindly contact us for return instruction before returning.One Year Unlimited Mileage Quality GuaranteeIf you receive any wrong items, or damage during the transportation or defect items, we will accept the return and pay the return freight.The full refund or replacement will be available for all faulty items.Please kindly contact us before return, our representatives will send you the detailed return instruction.The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.

Payment Method

We accept Paypal only for the payment, and all orders should be paid through sale, please do not pay directly to our Paypal account.

Paypal allows to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check Paypal for more information.

For multiple purchases, please add items to your shopping cart and pay once for entire order.

response