Ford Racing\'s head gaskets feature pre-flattened steel wire combustion rings. The exhaust side of the gasket is straight to accommodate FRPP block water passages.
Features and Benefits:
- Sold As A Pair
- Premium Quality
- Direct Fit Replacement
- Easy Installation
These premium head gaskets are reinforced to prevent blow-outs. They\'re sold as a pair and install between your engine block and cylinder heads.
Head Gasket Specifications:
Bore Diameter: 4.100\"
Compressed Thickness: 0.040\"
Compressed Volume: 8.8cc
Please Note: Several different water hole patterns have been used on 302 and 351W Ford Racing cylinder blocks and heads since their introduction. Engine assemblers should lay the head gasket on the block and the cylinder head (with front of gasket toward the front of the engine) to make sure there is a path for coolant flow from the block into the head. In some cases, holes may have to be drilled in the block or head, or punched in the gasket.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.