This item is pre-owned – it will work like newonce programmed to your vehicle
One (1)
Aftermarket remote keyless entry fob alarm
Transmitter control clicker keyfob controllerreplacement
Functions at 100% Tested & Guaranteed
Keyless entry remote comes with DIY FREEProgramming instructions
FCC ID: GOH-MM6-101890
Interchangeable FCC IDs:
ELVATKC
EZS469
EZSDEI469
GOH3YK-BTPRX
GOH-717-JLK
GOH-M24
H-MM6-101890
Part #: CRCX3
Frequency: 314 MHz
2 buttons
Battery: (1) 12V
Compatible w/ the following systems:
Pro Series
Pro 100
Pro 200
Pro 750
Pro 1000
Pro 3000
Pro 3500
Pro 5000
Pro 5500
Pro 7000
Code Alarm Elite Series
911
950
1100
1500
2000 SE
4500
6500
Competition
Elite Competition
Others
ALL PRO 2500
Autobahn
C-350
Chapman-400
Chapman-450
Chapman-500
Chapman-650
CSM2.5
CSM3
EVS
EVS II
Mirage 4500
Mirage 9000
Nighthawk 4.0.
RCS2
RLE1
Scorpion 600
Surestart SE
Surestart SE 433
Surestart RVS
Surestart RVS
VSS-200
VSS-250
VSS-350
XT PLUS 4.0
Programming Instruments:
Note: Each System module has four “slots”, or memory locations, to store transmitter codes, giving it the ability to operate from up to four transmitters. For proper operation, a transmitter code must be stored into each memory slot. When using less than four transmitters, follow the suggested programming parameters:
One Remote Transmitter – Program four (4) times
Two Remote Transmitters – Program each transmitter two (2) times
Three Remote Transmitters – Program two transmitters one (1) time,and the remaining transmitter twice.
1. Open the driver’s door. Drivers door MUST remain open and interior light on to enter into the programming mode.
2. Turn vehicle ignition on.
3. Press and hold emergency override button. After 10-15 seconds, the siren or horn will sound three (3) times. This indicates that the unit has entered the transmitter programming mode.
Keep holding the button.
4. Press the ARM button on the remote transmitter to be programmed. The siren or horn will sound once, indicating that the system has “learned” that remote transmitter.
5. Repeat step 5 for any additional transmitters.
6. Turn the vehicle ignition off and release the emergency override button to exit the programming mode. Test all remote transmitters to ensure that they work properly by toggling the LOCK and UNLOCK buttons.
100% Guarantee Remote Shipping / Return Policy
1. We have a 30 dayreturn policy.
2. All returns forreplacements and refund need an RMA #.
3. Please contact us beforereturning items so we can give you theRMA # and the proper returnaddress.
4. No refunds /replacements will be granted without an RMA#
Weensure proper working condition of all previously used or new remotes through aserious of tests performed with the Santronics Testing device. Each button istested for functionality prior to shipment and then logged.
Yes. It will have a working battery installed.
Battery Condition:
Your vehicle will be installedwith one of the following keyless entry systems:
The above information can changewhich remote you need
for your installed remote keyless system.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.