Ford 302ci High Performance Engine (street)

Custom built Ford 302ci for sale.302 actual cubic inches1991 OEM roller blockBlock has been blueprinted & de-burred, checked for warpage, and all main bearing/rod bearing clearances checkedStandard 4.000” boreARP main cap studsNew Clevite cam bearingsNew brass freeze plugs & cam plugEagle Cast Steel 3.000” stroke CrankEagle 5.090” SIR Rods (full-floating)ARP 8740 CapscrewsKeith Black Hypereutectic Flat-top Pistons (2VR)Speed Pro Plasma-Moly File Fit Rings(Gapped for N/A)28oz external balancedScat 28oz balancer28oz 157T SFI approved Flexplate(If running a truck/auto w/big bell housing, you will most likely need a 164T)
TC stall of at least 2000-2500 will be needed (autos)
Felpro GasketsPowerHouse Aluminum Heads (AFR Copy)2.02 Int./1.60 Exh. Valves61cc Combustion Chambers175cc Intake RunnersAFR guideplates & 3/8” rocker studsBeadlock style valve locksDual valve springs (rated for Hyd. Roller up to .550” lift)Pro Comp Hyd. roller .513/.513218/224 duration at .050110LSA1500-5500 rpm rangeTrickflow Hyd. Roller liftersHoward’s pushrods (1-piece hardened)Howard’s double roller timing chainDual plane aluminum intakeSpeedmaster fuel pumpNew timing coverNew 2pc fuel pump eccentricMelling HV oil pumpMoroso 7-qt dual sump panFord Racing black tall aluminum valve covers
*Perfect little engine for fox body mustangs, or trucks.
*oil pan currently set up for trucks and/or fox body mustangs.
❗️(Will not work on early model cars requiring front sump pans)❗️*Great oil pressure, no cooling issues, no leaks or blowby/smoke.*Consistent 135-140 lbs of cranking compression on all 8 cylinders (3-4% variation which is excellent)20-22 in hg at idle9.8-10:1 compression ratio (perfect for the street)Est. 350-370 hp (Has not been dyno’d) Just based off of math.
I built this engine to be reliable and a fun little street engine and not to have tons of power.
*Price is firm
This is very competitive with Blueprint, Summit, ATK and all your other box store/assembly line engines. ($7k plus after freight and tax)
*Will not come with: Exhaust, Carb, water pump, or distributor (due to many setups/configurations available)
I have a brand new brawler 750 double pumper I can let go of for an additional $700
*Not responsible for customer faulty tuning/setup or lack of care or maintenance
*Prefer pickup/Cash or Cashier’s check*If shipping, buyer pays truck freight service. Estimated $450 +or- (Please allow a couple of days to rig down and crate up for shipment nicely & correctly)
*Buyer also gets engine storage/transport stand, lift plate and storage port blockoff/sealing kit for convenience & token of appreciation
*Serious buyer gets the build/blueprint sheet
*Sale is final
*Prefer potential buyer to come listen and look at it in person. If I already take engine off the run stand after some time to make way for another build, I will not reinstall on the stand (due to past buyer last minute no-shows)
Thank you for understanding!
Thanks for checking it out!