Focusrite Pro REDNET-X2P-RST Dante Audio Network Interface with 2x2 Analog I/O

The Focusrite RedNet X2P is a compact, robust 2x2 Dante™ audio interface featuring two Red Evolution mic pres, stereo line out, and a stereo headphone amplifier. RedNet X2P quickly adds I/O to your Focusrite Red or RedNet interfaces or any Dante™ audio-over-IP system, and power, audio, and remote control are supplied using a single Ethernet cable – simply use a power over Ethernet switch or PoE injector. A local input mixer allows \'more me\' monitoring control, while a control lockout ensures settings remain unchanged when used remotely.

• Stereo 2x2 audio interface for Dante Audio-over-IP networks
• Two Red Evolution mic preamps for mic, line, or instrument-level inputs
• Power-over-Ethernet supplied: IEEE802.3af compliant
• Up to 24-bit/96kHz sampling rates
• Robust steel and aluminum Line Inputs:
  • Gain Range: 0dB to 68dB in 1dB steps
  • Type: Electronically Balanced, Zin = 6.2kΩ
  • Max. Input Level: >+24dBu, min gain
  • Frequency Response: 20Hz - 35kHz ±0.1dB
  • THD + N: -103dB (0.0007%) @ -1dBFS (@ 24dB Gain)
  • EIN:< -130dBu \'A\'-Weighted (typical)
  • Signal-to-Noise Ratio: -120dB \'A\'-Weighted (typical), min gain
  • Common-Mode Rejection Ratio: 50/60Hz CMRR: -80dB
  • Phantom Power: +48V, independently switchable per channel.
  • HPF: High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel
  • Air Mode: 2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz). Input impedance drop to Inputs:
    • Instrument Inputs Gain Range: 0dB to 68dB in 1dB steps
    • Instrument Inputs Type: Electronically Balanced, Zin = 2MΩ
    • Instrument Inputs Max. Input Level: >+15dBu, min gain
    • Instrument Inputs Frequency Response: 20Hz - 35kHz ±0.1dB
    • Instrument Inputs THD + N:< -100dB (0.001%) @ -1dBFS (@ 16dB Gain)
    • Instrument Inputs Signal-to-Noise Ratio: -118dB \'A\'-Weighted (typical), min gain
    • Instrument Inputs HPF: High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel
  • Level Outputs:
    • Line Level Outputs 0 dBFS Reference Levels: +18 or +24dBu (switchable)
    • Line Level Outputs Frequency Response: 20Hz - 35kHz ±0.1dB
    • Line Level Outputs THD + N:< -104dB (0.0006%) @ -1dBFS
    • Line Level Outputs Dynamic Range: -120dB \'A\'-Weighted (typical), 20Hz - 20kHz
  • Headphone Output:
    • Headphone Output 0 dBFS Reference Levels: >+19dBm
    • Headphone Output Frequency Response: 20Hz - 20kHz ±0.2dB
    • Headphone Output THD + N:< -103dB (0.0007%) @ -1dBFS
    • Headphone Output Dynamic Range: 117dB \'A\'-weighted (typical), 20Hz - 20kHz
    • Headphone Output Impedance: 5Ω
    • Headphone Impedance: 32 - Line Crosstalk:
      • Mic/Line Input to Input:< -72dB; 20Hz - 20kHz (driven channel at -20dBFS)
      • Mic/Line Input to Output:< -126dB; 20Hz - 20kHz (driven channel at -20dBFS)
      • Output to Mic/Line Input:< -159dB; 20Hz - 20kHz (driven channel at -20dBFS)
    • Output Crosstalk:
      • Output to Output:< -101dB; 20Hz - 20kHz (driven channel at -20dBFS)
    • Headphone Crosstalk:
      • Right to Left:< -85dB; 20Hz - 20kHz (driven channel at-20dBFS)
    • Digital Performance:
      • Supported Sample Rates: 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24-bit
      • Clock Sources: Internal or from Dante Network Master.
    • Front Panel Connectivity:
      • Outputs Headphone Outputs: 1 x 1/4\" stereo jack
    • Rear Panel Connectivity:
      • Inputs Mic/Line/Inst Inputs: 2 x Locking Combi XLR
      • Outputs Line Outputs: 2 x Male XLR
    • PSU & Network Connections:
      • PSU (PoE and DC): 1 x PoE (Port 1) Input and 1 x DC12V Locking Barrel Input Connector
      • Network: 2 x etherCON connectors, also compatible with standard RJ45 connectors
    • Top Panel Indicators:
      • LCD Screen: 1 x Screen (Status & Metering)
    • Dimensions (HxWxD): 1.87\" x 5.51\" x 4.09\" (47.5 x 140 x104mm)
    • Weight: 1.04kg
    • Power:
      • Power over Ethernet (PoE): Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible)
      • DC Power Supply: 1 x 12V 1.2ADC Power Supply.
      • Power Consumption: PoE: 11.0W - DC: 13.32W (When using supplied DC PSU)
    • Operating Temperature: Operates at up to an ambient temperature of 45°C