Fleetguard Fuel / Water Separator — Part Number FS19734
Brand: Fleetguard | Condition: New Old Stock (NOS)
Fleetguard FS19734 spin-on fuel/water separator — the direct equivalent of the Racor R45T, the 10 micron spin-on element for Racor\'s 400 Series housings. Fleetguard is Cummins Filtration\'s brand, one of the most respected names in heavy-duty filtration.
A fuel/water separator does the job no ordinary fuel filter can. Water in diesel fuel is the single most destructive contaminant a modern injection system sees: it does not lubricate, it flashes to steam at the injector tip, and it corrodes the precision surfaces inside the pump. A separator coalesces that water out of the fuel and drops it into the bowl where it can be drained, while filtering particulate at the same time. On a Racor 400 Series installation this element is both halves of that job in one spin-on can.
Condition Details
New Old Stock — never installed, never used. This filter has been held in long-term parts inventory, so the box, wrapper or label may show shelf wear, dust, fading, denting or dated printing. The filter itself is new, unused and unopened, with the sealing gasket in place. Photos show the actual item you will receive.
Specifications
- Part number: FS19734
- Fleetguard description: Fuel/water separator, spin-on
- Micron rating: 10 micron — per the Racor R45T it replaces
- Thread size: 1-14 UNS-2B
- Overall height: 3.45 in
- Outside diameter: 4.35 in
- Housing series: Racor 400 Series, rated 45 GPH
- Style: Spin-on, short-and-wide separator can
- Sold as: one (1) filter
Note the shape: at 4.35 in diameter and only 3.45 in tall this is a short, wide separator can, quite unlike a conventional tall fuel filter. If you are matching it to a housing, the 1-14 thread and the 4.35 in diameter are the two checks to make.
Superseded & Cross Reference Part Numbers
Racor / Parker: R45T
Baldwin: BF1389-O
Donaldson: P551057
Mann & Hummel: WK1020X
Coopers: FSM4260
Volvo: 20381204
Crosland: 20381204
⚠️ Racor suffix letters are micron ratings — pay attention to this one. The R45 element family comes in three grades on the same can:
RacorMicronTypical useR45S2 micronFinal / secondaryR45T10 micronPrimary — this filterR45P30 micronPrimary, coarse
FS19734 is the 10 micron T-grade. It is not a substitute for an R45S or R45P installation. Fitting the wrong grade will either restrict flow and starve the engine, or let contaminant through to the injection pump. Check which grade your system specifies.
Cross references are provided as a guide; confirm against your own equipment before purchase.
Features
- 10 micron fuel/water separation — removes water and particulate in a single element, protecting the injection pump and injectors from the two contaminants that destroy them
- Direct Racor R45T equivalent, so it fits the very widely used Racor 400 Series spin-on housings — 445R, 645R, 745R and 345RC
- Correct 1-14 UNS-2B thread and correct 4.35 in body diameter to seal on the factory head
- Rated for the 400 Series\' 45 GPH flow — real capacity for marine, agricultural, generator and heavy truck fuel systems
- Fleetguard is Cummins Filtration\'s brand, built for heavy-duty diesel service and tested to industry standards
- Genuinely scarce. One supplier lists this number as a special-order item with a two-to-three week lead time at $98.71. A filter you have in hand today is worth more than one that ships in three weeks
- Consumable by design: separators are a scheduled service item and a repeat purchase
Application
Spin-on element for Racor 400 Series fuel/water separator housings:
- Racor 445R
- Racor 645R
- Racor 745R
- Racor 345RC
Racor 400 Series housings are fitted extensively across marine diesel, agricultural, construction, generator set and heavy truck installations — both as factory equipment and as the most common aftermarket separator upgrade. Wherever a 400 Series bowl is mounted, this is one of the three elements that fits it.
Also cross-referenced to Volvo 20381204.
Because this element is defined by the housing rather than by the engine, the reliable check is the physical one: confirm your housing takes a 1-14 thread, 4.35 in diameter spin-on, and confirm whether your system calls for the 10 micron (T) grade. Tell us your housing model and we are glad to help you check, and we will happily photograph the filter with a tape and a thread gauge.
Why Choose Fleetguard?
Fleetguard is the filtration brand of Cummins, developed around heavy-duty diesel service where filters protect injection equipment worth many times their own cost. On a fuel/water separator the performance that matters — how much water the media actually coalesces and holds, and whether it keeps doing it as the element loads up — is invisible from outside the can. That is exactly why brand matters here. Water that gets past a separator does not announce itself; it shows up later as a corroded pump or a wiped injector, long after the cheap filter that let it through has been thrown away.
Returns
We accept returns within 30 days of delivery through the return request system. Items must be returned in the condition in which they were received.
Thank you for looking at our listing. We are a family-run parts business and we take real care in identifying, describing and packing every item we sell. Much of our inventory is genuine NOS dealer stock that simply is not available new any longer, and we are glad to see these parts go to people who still keep older equipment running properly.
If anything about this listing is unclear, if you would like additional photographs, or if there is any problem at all with your order, please contact us first and give us the chance to make it right before leaving response. We answer messages quickly and we will always work with you.
QBS Parts, Inc — Gardena, CA
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.