Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

Fire-Lite FireWatch IPDACT-2UD IP Fire Alarm Communicator Contact ID Notifier

Fire-Lite FireWatch IPDACT-2UD IP Fire Alarm Communicator Contact ID Notifier
$149.00

Buy Now

OVERVIEW

Fire-Lite Alarms FireWatch IPDACT-2UD IP Communicator, manufactured by Teldat in Spain under Teldat model TS563/2. This module transmits fire alarm system information to a central monitoring station over a standard IP network instead of over telephone lines. It connects to the primary and secondary telephone ports of a fire alarm panel's built-in DACT, captures the Contact ID data the panel would normally dial out, and converts it into encrypted Ethernet UDP packets. The -2UD version adds a modem daughter board supporting panel upload and download over the internet or a customer intranet, which the base IPDACT-2 does not have.

TESTED & WORKING STATUS
  • NOT TESTED. The unit has not been powered up, connected to a panel or network, or functionally verified by the seller.
  • Visual inspection only: board clean, no damaged or missing components, all connectors intact, factory QC mark present.
  • The seller reports the unit was previously configured. It will be reset to factory defaults before shipping.
  • Ethernet communication, panel capture, upload/download function and central station reporting are all Fire-Lite IPDACT-2UD, FireWatch series
  • Manufacturer: Teldat, model TS563/2, made in Spain
  • Serial number: 563/20597
  • Network: any customer-provided Ethernet 10/100 Base connection, LAN, WAN, DSL or cable modem
  • IP addressing: static or DHCP-assigned dynamic
  • Supply: 10-28 VDC from the panel
  • Current draw: approximately 98 mA standby and 155 mA in alarm at 24 VDC
  • Signaling format: Contact ID from the panel DACT
  • Encryption: 512-bit
  • Supervised inputs: 2. Outputs: 2. Plus tamper input
  • Supervision interval: central station polling every 30 to 90 seconds rather than the 24-hour analog test signal
  • Listing: UL 864 listed under Other Transmission Technologies, NFPA 72 compliant
CONDITION

Unused, opened for inspection. Board clean with no flux residue, field markings, scratches or damaged components. Terminal screws unmarked. Connectors undamaged. Carton opened and retaped with light shelf soiling and edge wear. All original contents present.

COMPATIBILITY

IMPORTANT - CENTRAL STATION REQUIREMENT: this communicator only works with a compatible Teldat VisorALARM PLUS IP receiver at the central station. It is not a generic IP dialer and will not report to a monitoring station that does not run VisorALARM. Confirm with your central station before purchasing.

Panel side: works with Contact ID compatible fire alarm control panels equipped with a DACT and tone dialing, including Fire-Lite, Notifier and other legacy panels on the Fire-Lite compatibility list. No changes to the panel's existing configuration are required. Programming requires a PC with an RS-232 serial port and a console cable, or the supplied Configurator software.

DISCONTINUED: Honeywell has discontinued the IPDACT-2 and IPDACT-2UD and lists the LTE-CFA and LTE-CFV as the replacement models. This unit suits owners maintaining an existing IPDACT installation rather than a new build.

WHAT'S INCLUDED
  • IPDACT-2UD communicator board with modem daughter board, in factory foam
  • Ethernet patch cable, sealed
  • IPDACT-2 and IPDACT-2UD Configurator and Documentation CD, sealed
  • IPDACT-2/IPDACT-2UD Quick Start Programming Guide
  • EOL resistors installed on the supervised input terminals
  • Original carton
  • No fire alarm panel, no power supply, no mounting hardware, no console cable
INSTALLATION & LIABILITY

Installation and programming must be performed by a licensed fire alarm contractor in accordance with NFPA 72 and all applicable local codes. This unit is sold untested and has not been verified against a panel or receiver. It was opened for inspection and photography, and will be reset to factory defaults before shipping. Confirm that your central station operates a compatible Teldat VisorALARM PLUS receiver, and verify panel compatibility and firmware version, before purchase. No manufacturer warranty is offered.

Shipping Policy

We ship within 3 business day of payment. All items are carefully packed.

Returns

30-day returns accepted. Item must be in original condition.

Contact

Message us with any questions before purchasing.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design