Fire-Lite CRF-300 Addressable Relay Module
CRF-300 is a Fire-Lite addressable relay module that gives an intelligent Fire-Lite panel a dry-contact output on the SLC. It is used to control auxiliary equipment such as door holders, fan or air handler shutdown and dampers, or to reset four-wire smoke detector power, all under panel programming. It supports both the CLIP and LiteSpeed communication protocols.
Key features
- Two Form C dry contacts that switch together
- Relay and electronics powered from the two-wire SLC loop
- Rotary switches for direct address entry (01–159 on MS-9600 series panels)
- LED blinks green on each poll and turns steady red when active
- Built-in type code identifies it to the panel as a relay module
SpecificationsDevice typeAddressable relay moduleContacts2 Form C, switch togetherOperating voltage15–32 VDCMax. SLC current6.5 mA (LED on)Average current230 µA (CLIP), 255 µA (LiteSpeed)Contact rating (resistive)3.0 A at 30 VDC non-coded; 0.9 A at 125 VACTemperature range32–120°F (0–49°C)Humidity10–93% non-condensingDimensions4.5 in H × 4 in W × 1.25 in DMounting4 in square × 2⅛ in deep boxListingsUL S2424, FM, CSFM 7300-0075:185, MEA 72-01-EBefore you order
Relay contacts are not supervised, so for horns and strobes on a supervised NAC use the CMF-300 control module instead. Mount in a 4 in square box 2⅛ in deep (SMB500 surface box optional).
Condition: New. Ships same business day when ordered before the daily cutoff.
Questions about compatibility or larger quantities? Send us a message through .
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.