|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Ferwooh USB Logic Analyzer 24MHz 8CH 8 Channel UART IIC SPI Debug Device +...
$23.98

Ferwooh USB Logic Analyzer 24MHz 8CH 8 Channel UART IIC SPI Debug Device + 12PCS 6 Colourful Test Hook Clip Set + USB Cable + Debugging Tool Sets Product Details - Publisher: Ferwooh
- Publication date: 0
- Input voltage range: 0~5V;Digital channels: 8; Input low level: < 0.8V; Input high level: > 1.4V; Error/Accuracy: Pulse width measurement: ±42ns (at 24MHz).
- Logic sampling can go up to 24M/s per channel, in fact 10M/S is plenty, Maximum sampling rate: 24Msps.
- 8 channels: You can collect signals while analyzing data. It can monitor 8 different digital signals. Sample and analyze like I2C, UART.The sampling rate can be set as follows. 24KHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz;
- Supports UART IIC SPI debugging, WIN7 (32 & 64), 2K, XP, LINUX.
- This Set of kits contains 12pcs SMD IC 6 Colors Test Hook Clips matching for using this 24MHz 8CH logic analyzer, with USB cable and Female cable.When you do MCU related products, especially for UART, SPI, IIC and other communication debugging, this sets will be helpful.
Features:Logic sampling can go up to 24M/s per channel, in fact 10M/S is sufficient.8 channels: You can collect signals while analyzing data. It can monitor 8 different digital signals. Sample and analyze like I2C, UARTLogic sampling can be up to 24M per second per channel.The sampling rate can be set as follows. 24KHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz;If you need product information, please contact us.Specifications:Maximum sampling rate: 24MspsInput voltage range: 0~5VDigital channels: 8Input low level: 1.4VSupported protocols: SPI, IIC, UART, SMBus, I2S, CAN, parallel, custom, search, asynchronous, 1-Wite, PS/2Input impedance: 1MΩ|| 10pF (typical Value, approximate value)Crystal: ±20ppm, 24MHzError/Accuracy: Pulse width measurement: ±42ns (at 24MHz)Size (L x W x H): 55 x 28 x 14 mmProduct weight: 50gNote:First, please make sure the computer is USB2.0 or USB3.0 high speed. Normal operation cannot be performed with low-speed USB.The normal operating voltage of the analyzer is 5.5V or less, low level if it is 1.5V or less, and high level between 1.5 and 5.5V, and the highest voltage is 7.5V. . Please ensure the acquisition signal voltage is within 5.5V.Please ensure the signal frequency is 0-12Mhz digital signal.Before collecting the signal, please connect the GND of the forward logic analyzer to the connected single board GND. Otherwise, the measured data will be incorrect.Please insert the USB into the analyzer horizontally to avoid damage.Package Contents:1 X 24MHz 8 Channel USB Logic Analyzer 8CH Logic Analyzer12x test clips1x USB cable

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|