Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

FeelTech FY6900 60M DDS Function Signal Generator Arbitrary Waveform Pulse

FeelTech FY6900 60M DDS Function Signal Generator Arbitrary Waveform Pulse
$212.46

Buy Now

frequency characteristic

Product Model

FY6900-60M

Frequency range of Sine wave

0~60MHz

Frequency range of square wave

0~25MHz

Frequency range of other waves

0~10MHz

Minimum adjustable width of pulse wave

20ns

Minimum Frequency Resolution

1μHz

Waveform Length

8192 points (8K points) *14Bits

Waveform sampling rate

250MSa/s

Vertical Resolution of Waveform

14 Bits

Amplitude range (peak to peak)

5MHz< frequency≤10MHz

frequency >20MHz

1mVpp~20Vpp

1mVpp~5Vpp

Amplitude resolution

1mV

Output impedance

Bias Adjustment Range

Minimum Bias Resolution

1mV

Phase adjustment range

0~359.99°

Minimum phase resolution

0.01°

display

2.42.4 inches TFT color liquid crystal display

Interface

115200 bps

Power Supply

AC100V~240V

environment condition

temperature:0~40℃ humidity:﹤80%

·Frequently Asked Questions

Fault phenomenon

Solution

Turn the power button to the \"-\" side, the signal generator screen is still not lit, there is no display, the channel indicator is not lit

1) Check if the power connector is connected.

2) Check that the power button is in place.

3) After completing the above checks, restart the instrument.

4) If you still cannot use the product properly, please contactFeelElec.

Signal generator CH2 is locked

1) Check that the signal generator is operating in sync. Press the SYSTEM button -> SYNC Enter the sync settings interface to cancel all sync parameters.

2) The power to restart the signal generator can also be unlocked.

Correct setting but no waveform output

1) Check that the BNC cable is securely connected to the corresponding [CH1] or [CH2] channel output port.

2) Check the BNC cable for internal damage.

3) Check that the BNC cable is tightly connected to the test instrument.

4) Check if the upper side indicator of the [CH1] or [CH2] button is lit. If it is not lit, press the corresponding button to make its indicator light.

5) If you still cannot use the product properly, please contactFeelElec.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design