What advantages does FOXWELL JT400 have that other competitors do not?
Colorful LCD screen
Sensing button
Oil resistant glass operating panel
Digital pressure gauge
Auto regulate & stabilize the pressure
Standard test mode and professional test mode
Database for testing
What are FOXWELL JT400 working modes ?
1.Injector Test
Detect solenoid injectors resistance.
2.Uniformity Test
Inspect fuel injection of each injector by observing its uniformity.
3. Sprayability Test
Inspect atomization of each injector by observing
4.Leakage Test
Inspect the sealing conditions of the injector needle valve under system pressure and to
find out the injector with oil droplet.
5.Injection Test
Inspect injecting volume in 10 seconds meets the design specifications.
6.Auto Mode Test
Inspect the injectors according to the established program1 of the equipment
7.Variable Speed Test
Inspect the injectors in variable speed conditions
8. Ultrasonic Test
Clean the carbon deposits inside the fuel injector through ultrasonic
9.On-Vehicle Clean
Cleaning the engine fuel supply pipeline, injector, and combustion chamber with the
machine does not require disassembling.
Which cleaning solution should I use?
Ultrasonic Bath:
It is recommended to use ready-made bottled ultrasonic fluid or special ultrasonic cleaning powder.
If the above items are not available, a mixture of water and the following items can be used as a substitute:
Degreaser
Kitchen cleaner
Sodium bicarbonate
Injector Test Fluid:
It is recommended to use ready-made bottled test fluid.
If such test fluid is unavailable, the following items may be used as an alternative:
Kerosene / Paraffin
Diesel fuel
⚠️ Never use ethanol or gasoline as test fluid, as they are highly flammable!
Test Preparation
1) Disassemble the injectors from the engine to check the o-rings inside for damage. If it is damaged, we need to replace it. Put the
outside of the injector in gasoline or detergent, and wipe it with a soft cloth after cleaning the outside oil sludge carefully.
2) ensure the liquid is enough test liquid inside the tank. Pour test liquid from the port at the top left side of the unit and watch the
liquid level in the fuel level viewer. In most cases, fill the tank with liquid up to 1/2 of the capacity.
3) Pour ultrasonic detergent into the ultrasonic cleaning basin so that the needle valve of the injector is covered by the
detergent.
4) Pour cleaning detergent in the ultrasonic cleaning basin and keep the detergent cover the injectors needle.
5) Turn on the power switch.
Note: Test liquid and detergent are provided together with the unit. The test liquid is used for uniformity/sprayability test, leakage test,
Injecting volume test and Auto. test. The cleaning detergent is used in Combustion Chamber cleaning. The ultrasonic cleaning uses
special injector detergent (or test liquid and detergent that comes with by the unit).
Specifications:
Operating Power Supply: AC220V / AC110V
Main Unit Power : 300W
Ultrasonic Power: 60W
Tank Capacity: 3L
Display : 4.0-inch, 320x480
Operating Pressure : 0-8 bar (0-116 psi)
RPM: 100-9900 RPM
Pulse Width: 0.5-25.0 ms
Operating Temperature: 10-40°C (50-104°F)
Supported Injectors: Electromagnetic injectors (EFI, GDI, etc.)
Does not support piezoelectric injectors
Dimensions: Main Unit: 350 x 340 x 385 mm
Packaging: 380 x 370 x 380 mm
Weight: Net Weight: 11.15 kg
Gross Weight: 14.15 kg
Packing List:
• Main unit:1 set
• Ultrasonic cleaner cover:1 pcs
• Injector cleaning bracket:1 pcs
• Fuel distributor package:1 set
• 4-cylinder pulse signal cables:1 set
• Pulse signal connection cable1:4 pcs
• Pulse signal connection cable3:4 pcs
• Pulse signal connection cable4:4 pcs
• Adaptor 1 for fuel top-supply injector:4 pcs
• Coarse thread adaptor for fuel top-supply injector:4 pcs
• Swiss thread adaptor for fuel top-supply injector:4 pcs
• Hexangular stopper:3 pcs
• Adjusting pole(H80):1 pcs
• Knurled nut:1 pcs
• Pressing screw:1 pcs
• Adaptor for GDI injector(D16):4 pcs
• Top Oil Supply Connector(D17.5):4 pcs
• Tool box:1 pcs
• Oil outlet adapter:1 pcs
• Power cable:1 pcs
• O ring 9.72.65:10 pcs
• User\'s manual:1 pcs
How to choose test fluid?The test fluid is used to test and judge whether the performance of the fuel injector is in good condition. It is a colorless and transparent liquid with no irritating odor, non-corrosive, and not easy to emit. Its function is to simulate various working states of the fuel injector as a medium. In order to achieve the best test effect, it is recommended to use professional automotive injector test fluids. If it is not available locally, as an alternative, it\'s recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the test fluid.How to choose cleaning fluid?Cleaning fluid is used to clean deposits (such as carbon deposits) on fuel injectors, and it is usually highly corrosive and flammable. In order to achieve the best test effect, it is recommended to use professional injector ultrasonic cleaning fluid. If it is not available locally, it\'s recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the cleaning fluid, but note that the effect may not good enough.
FAQ
1) The unit does not respond when the power is turned on.
Check the fuse on the lower right side of the unit and replace the fuse (5A) if it is damaged or broken.
2) Fuel distributor (rail) is leaking.
Check the o-ring and replace if damaged or broken. Do not tighten the adapter fitting too much,otherwise, it may cause leakage.
3) When running, there is no working pressure.
When using a new machine for the first time, or if the machine has not been used for a long time, there may be no fuel pressure. In this case, select the \"first time use\" function in the system functions, and then do the following:
a) Connect the test connector to the unit\'s fuel supply line and insert it into the fuel filler neck as shown in the illustration.
b) Then, run the first time use function.
c) When liquid comes out of the test connector, stop the operation. The device stops automatically after 30 seconds of operation.
4) There is no oil feed pressure, the buzzer sounds.
The machine has a lack of fuel warning function, when there is not enough fluid in the tank, the machine will beep, then automatically shut down the fuel pump and injector nozzle, and return to the stop state. Add test fluid to the unit until the buzzer stops beeping.
5) Completely emptying the test fluid from the glass tube requires pressing the Drain button several times.The solenoid valve will automatically stop after 15 seconds and will need to be emptied more times if more fluid is present.
a) Do not place anything on the control panel to prevent breaking the test measuring cup/glass panel.
b) Do not disconnect the oil feed connection until the system pressure reaches \"0\" to prevent test fluid from spraying out.
c) Always ensure that the unit is reliably earthed when in use.
d) The device has a lack of oil alarm function. When the liquid level falls below the minimum line, the device will emit a warning
sound and at the same time automatically stop the oil pump and injector nozzle work. Until the test liquid is sufficient, the
equipment will be able to work normally.
e) Clean the control panel in time, pulse signal line please ask stained test liquid, cleaning agent.
On Sep 6, 2026 at 14:29:56 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.