U.S. BUYERS – PLEASE NOTE: This item ships DDU (duties unpaid). This item is of U.S. origin, so no U.S. import duty is expected (U.S. goods returned). Because the value is over US$2,500, U.S. Customs requires a formal entry — DHL will ask for your SSN (or EIN for a business).FLUKE 5700A Multifunction Calibrator with Wideband Module Self Test OK TestedInspected in JapanShips from JapanTracked ExpressItem Condition
[Guaranteed] Arrived in working condition from a development institute or research center.
We do not perform calibration, so we cannot guarantee the accuracy and precision of the unit within the calibration period.
Please purchase this item with the understanding that it is a used item.
The unit has light scuffs and dirt overall. The bottom has dirt, black spot marks and residue from two removed stickers, and a gold-colored metal fitting is attached between the front V-GUARD and GROUND terminals.
The rear CALIBRATION switch still has its Fluke tamper-proof seal, which is partly worn white. The top cover has a Fluke calibration sticker dated October 2018, which is past due. The fitted F1 fuse has no visible rating marking, but the unit powered up and operated normally on 100V mains.
Operation Check
- Power-on self test: PASS, no errors, normal 0.00000 mV / STANDBY screen
- Display and front-panel operation: normal
- Firmware: Main J / Inguard A
- Installed Assemblies screen: Switching Matrix, DC Volt Module, AC Volt Module, 220V Module, 1100V/2A Module, Current Module, Ohms Module, Wideband Module
- DC voltage 10 V output: 10.00005 V measured
- AC voltage 10 V / 1 kHz output: 9.99993 V measured (34410A DMM)
- DC current 0.5 A output: 0.49996 A measured
- AC current 0.5 A / 1 kHz output: 0.49977 A measured
- Resistance 1 kohm (4-wire): calibrator shows 0.9999990 kohm, 34410A DMM read 1.00005 kohm
- Wideband 1 V / 1 kHz output: 0.99949 V measured (using the included N-type cable and 50 ohm terminator)
Included Items
- 1x Detachable power cord (two-pin plug with separate ground lead. The unit\'s rating label reads 47-63 Hz, 300VA MAX, with no voltage stated. Tested on 100V mains. The rear panel has line-voltage selector switches, so please check the setting matches your mains before powering on.)
- 1x Pomona B-24-2 banana patch cord (black, bagged)
- 1x Pomona B-24-6 banana patch cord (blue, bagged)
- Black test leads with red, blue and black banana plugs
- 1x N-type male-to-male coaxial cable
- 1x Fluke 50 ohm feed-through terminator (Huber+Suhner, DC-100 MHz, 0.5 W) with banana-to-BNC-to-N adapter
- 1x Twisted-wire cable labeled for the 5700A calibrator, with two gray connectors
- 1x Fluke gray pouch
- 1x Dark red round case
- 1x Small bag of screws and a brown plate
- 1x Small bag of spare glass-tube fuses
Please check the photos for exactly what is included.
Product Info
The Fluke 5700A is a high-performance multifunction calibrator used in calibration labs to calibrate precision DMMs and other instruments. It sources DC and AC voltage up to 1100 V, DC and AC current, and resistance with ppm-level uncertainty.
Standard interfaces include IEEE-488 and RS-232, plus 5725A / 5205A / 5220A amplifier interfaces, phase lock in and variable phase out. This unit\'s Installed Assemblies screen lists the Wideband Module, and the front WIDEBAND output was confirmed CalibratorCountry/Region of ManufactureUnited StatesFunctionsDC Voltage, AC Voltage, DC Current, AC Current, Resistance, Wideband ACDC Voltage Ranges220 mV, 2.2 V, 11 V, 22 V, 220 V, 1100 VWideband ModuleInstalledInterfacesIEEE-488, RS-232, Amplifier Interfaces, Phase Lock In, Variable Phase OutPower47-63 Hz, 300 VA MaxWarm-Up TimeUp to 30 minutesOperating Temperature0 to 50 CShippingDuties & TariffsReturnsAbout Us
We ship worldwide from Japan by DHL / FedEx express with a tracking number on every order.
- Orders are dispatched Monday to Friday. Weekends and Japanese public holidays are not available because the carriers are closed.
- We can only ship to the address registered on . If you need a different address, please update it on before ordering.
- Every item is professionally packed with double-wall boxes and cushioning. Sensitive equipment is packed in anti-static material.
- We do not mark merchandise values below value or mark items as gifts. Japanese, U.S. and international regulations prohibit this.
For buyers in the United States: Because the item value is over US$2,500, this item ships DDU (duties unpaid). This item is of U.S. origin, so no U.S. import duty is expected (U.S. goods returned), together with any clearance fees charged by DHL. U.S. Customs requires a formal entry for this value: DHL will ask for your SSN (or EIN for a business) to clear the shipment. We will contact you after purchase to confirm this before we ship.
For buyers outside the United States: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer\'s responsibility. Please check with your country\'s customs office to determine what these additional costs will be prior to offerding or buying.
Important - if a DDU shipment is returned to us: When an item ships with duties unpaid (DDU), the carrier will contact you to collect import charges and any clearance documents required. Please respond promptly. If the shipment cannot be delivered and is returned to us because import charges were left unpaid, or because the carrier\'s requests went unanswered, \'s Money Back Guarantee does not cover an order that could not be delivered for these reasons. In that case we will refund the item price once the returned item reaches us, less the actual round-trip shipping and any return or customs charges billed to us by the carrier (at cost, documented). Please make sure you are able to receive the shipment before buying.
Returns are accepted under the return policy shown at the top of this listing, and every order is covered by Money Back Guarantee.
- If anything is wrong with your order, please message us first — we answer every message and will work with you until it is resolved.
- Any damage caused in transit should be reported within 3 days of delivery, with photos of the item and the outer box.
- Returned items must include all accessories and the original packaging.
We are a Japanese company specialising in used equipment sourced within Japan. Every unit is received, inspected and photographed by our own team in Niigata before it is listed — the photos in this listing are of the actual item you will receive.
Japanese equipment is typically kept in careful condition, and we describe exactly what we find, including any faults. If you have a question about this item or are looking for something we do not currently list, please feel free to contact us.
Inspected In-House
Checked and photographed by our own technicians before listing. What we find is what we write.
Packed for Transit
Double-wall boxes, cushioning and anti-static material for sensitive equipment.
Tracked Worldwide
DHL / FedEx express from Japan with a tracking number on every single order.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.