- Upgrade lengthen size meets different machine needs,except Dewalt saw
- The thin rip guide is machined from a solid piece of aluminum alloy,anodized surface,metal rigid structure,strong and stable,long service life
- Sliding tenon design,adjustable inward and outward,locks down solid without swaying from side to side,this would help avoid the rips drift,specifically designed for precision cutting
- The thin rip jig has 2 guide bearing on the tip play the role of driving the stock forward,to make feeding your stock through an easy and smooth moving process
- Equipped with sliders and T-bolts, fit 3/8 x 3/4 inch T-slot and 1/4 x 3/8 inch T-slot track, can work with most table saw, router table and band saw
Product description
This extended version can reach the saw blade which 6.1 inch/155mm away from the T-slot. It fits most table saws,except Dewalt saw.
Lengthen Size
Supports most table saws where the mitre track sits too far from the blade.(Long still not enough to reach Dewalt saw blade)
Metric/Imperial Scale
Scales for both millimeter and inch are laser engraved on the anodized aluminum body to the same tolerance.
Slider was Locked to Screw Rod
That way you would only need to deal with tightening the knobs and not have the threaded rods come out of the \"T\" nuts, or bottom out in the slots.
Equipped with Slider & T Bolt
Fit 3/4 x 3/8 inch standard miter slots, 30mm and 45mm T-Slot Track.
Securely, Accuracy, Safety Speeds Production
1. It slide easily into the T-slot and locks securely, firmly pressing the workpiece against the fence for clean and smooth cuts, get consistent thin strips,speeds production.
2. You can set the dimension of your strips without having to compensate for the thickness of you saw blade.
3. It keeps your fingers away from the saw blade, which greatly improves safety.
Using the thin rip jig is very easy Steps for Usage
Step 1. Slide the jig into the T-slot of your table saw,extend the bearings until they touch the tooth of the saw blade, set the dimension of your strips and lock down. (without having to compensate for the thickness of your saw blade)
Step 2. Lock the jig a few inches in front of the saw blade.
Step 3. Lock your fence so your stock is just touching the bearings and make the cut.
Step 4. Repeat as needed,cutting consistent thin strips.
Specification Material Aluminum alloy Shortest distance 2.4inch/60mm Longest distance 6.1inch/155mm Support 3/4 x 3/8 inch miter slots(19 type), 30 type,45 type T-track slot, 50/66 type fence, 74 type fence Package Included 1 x Table Saw Thin Rip Jig ;2 x T-slot Bolts
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.