Electronics Component Basic Kit with 830 tie-points Breadboard Resist for UNO R3

Product description: 100% Brand new and high quality.
MB102 Breadboard 830 Points:
830 tie-point IC-circuit area plus 2x100 tie-point distribution strips providing 4 power rails.
White ABS plastic body with black printed legend. Color legend on distribution strips.
With self-adhesive tape on the back, make it easy to stick on the Arduino Prototype Shield. Specification:
- Solderless
- terminal Strip, tie-point 630
- Distribution Strips, tie-point 200
- Wire size: Suitabe for 20-29 AWG wires
- Size: 16.5 x 5.5 x 0.85 cm.
Breadboard jumper cable wires 65PCS:
49 pcs 120mm length*2
8 pcs 150mm length*2
4 pcs 200mm length*2
4 pcs 240mm length*2 Description:
The male to male flexible breadboard jumper wire provides an easy way for you to build your own circuitry on a breadboard, ideal for creating circuits between your microcontroller and the breadboard on the bots with both ends of a prototyping board connector.
Features:
- Material- pure copper wire,PVC,Good conductivity,can be used repeatedly
- Color & Size - Green,white,black,yellow,red,orange - 4.72 inch(65pcs),6.29 inch(15pcs),7.87 inch(10pcs),9.84 inch(10pcs),many kinds of colors and sizes can do all kinds of circuit experiments.
Breadboard Power Supply Module:
Description:
100% Brand new and high quality.
Very easy to use power supply board for use with the MB102 Breadboards. You have two separate power supplies 3.3v or 5v. You can have two different voltages or bothcan be set the same. The voltage outputs are set by jumpers on each output. The board can be powered from a wall wort power supply 6.5-12volts. It works great forpowering your Arduino or Raspberry Pi project boards.
Features:
For MB102 breadboard, two way independent control, can be switched to 0V, 3.3V, 5V.
Fit for: MB-102 Breadboard;
Voltage range:Input voltage: 6.5-12V (DC) or USB power supply
Locking ON / OFF Switch, no need to unplug the power adapter.
LED Power Indicator indicated when the board is powered up.
Output Current: 700mA(Max);
Total Size : 51 x 32 x 19mm/ 2\" x 1.3\" x 0.75\" (L*W*H) Package Content : 1pcs Power Supply Module.
1pcs 830 tie-points Breadboard
65pcs Jumper Wire
10pcs Diode Rectifier (1N4007)
5pcs NPN Transistor (8050)
5pcs PNP Transistor (8550)
10pcs Button (5x5x6)
10pcs 22pf Ceramic Capacitor
10pcs 104 Ceramic Capacitor
5pcs Electrolytic Capacitor (10UF 50V)
5pcs Electrolytic Capacitor (100UF 50V)
5pcs White LED
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
10pcs Resistor (10R)
10pcs Resistor (100R)
10pcs Resistor (220R)
10pcs Resistor (330R)
10pcs Resistor (1K)
10pcs Resistor (2K)
10pcs Resistor (5K1)
10pcs Resistor (10K)
10pcs Resistor (100K)
10pcs Resistor (1M)