新建网页 3
Electric Heating Constant Temperature Lab Incubator 110V
Powered Digital Display Incubator
The electro-thermal incubator is a high-performance thermostatic facility for the scientific research
and industrial fields. It is equipped with a stainless steel inner container and
an intelligent temperature control system,effectively keeping the internal temperature uniform
and stable.The electro-thermal incubator is suitable for drying,roasting,wax melting
and thermal treatment in the industrial enterprises,mining enterprises and laboratories
of scientific research institutions.
Parameters:
Voltage 110V Power 180W Temperature Control Range RT+5-65˚C Temperature Accuracy ±0.5˚C Heating Mode Heating tube Material of Inner Container Stainless steel inner container External Size of Machine 11.81X18.5X16.14 inch (30X47X41cm) Size of Inner Chamber 10.04X10.63X10.04 inch (25.5X27X25.5cm)
Attention!
1. During operation, do not touch the two wiring terminals on the top of the chamber and the electrical components on the side or top with your hands.
2. Avoid wiping the equipment with cloth or rinsing it with water.
3. Power Management:
(1) Before use, install the power socket as specified and ensure the upper inclined foot is effectively grounded.
(2) The power cord should not be wrapped around metal objects or placed in damp or high-temperature areas to prevent rubber aging and electric leakage.
(3) Disconnect the power supply when the equipment is not in use for a long time.
4. Samples:
(1) Do not place corrosive or flammable items.
(2) When placing precious strains and cultures, observe them frequently and cut off the power immediately in case of abnormalities.
5. Maintenance:
(1) Clean and maintain the constant-temperature incubator regularly to keep the equipment operating normally.
(2) Do not open the temperature controller unless it is necessary, so as to avoid damage.
6. High-Temperature Protection: When the constant-temperature incubator is used at high temperatures, take care to prevent burns.
Operation Method:
1. Connect the power supply, and then turn on the power switch and heating switch.
2. Press the SET key to enter the temperature setting mode. The lower row displays the set temperature. Use the ◄, ▲ and ▼ keys to adjust the temperature to the desired value, and then press the SET key again.
3. If an over-temperature alarm is triggered due to the change of the set temperature value, press any key to mute the alarm.
4. ◄ key: In the setting state, press this key to shift, flash and change the set value.
5. ▼ key: In the setting state, press this key to decrease the set value progressively, and press and hold this key to continuously decrease the set value progressively. In the timing state, press and hold this key for 3 seconds to stop the program.
6. ▲ key: In the setting state, press this key to increase the set value progressively, and press and hold this key to continuously increase the set value progressively.
7. If no key is pressed in 1 minute, the controller will automatically return to the normal display state.
8. If the upper row of the display window of the controller displays \'--\', it indicates that the temperature sensor or the controller has a fault. Please carefully check the temperature sensor and its wiring.
Product Features:
1. The outer shell is made of high-quality cold-rolled steel sheets, and the surface is treated by the electrostatic spraying technology.
2. The working chamber is crafted with stainless steel or high-quality steel plates, and undergoes anti-corrosion treatment and precision processing. The shelf height is adjustable, and the four corners are semicircular for easy cleaning.
3. The double-layer lining design is safe, reliable, aesthetically pleasing, easy to open and small in space, and the machine is an ideal choice for processing and manufacturing in factory workshops, as well as use in offices.
4. The full three-dimensional forced air supply technology ensures uniform temperature within the working chamber.
5. The incubator is equipped with a double-layer tempered glass observation window, the height of the testing shelf in the working chamber is adjustable, ensuring clear observation and convenient operation.
6. The microcomputer intelligent digital display temperature controller provides precise temperature control to prevent overheating, and has the functions of timing, over-temperature alarm, etc.
7. The excellent thermal insulation design is adopted to allow long-term high-temperature operation, the service life is long, replacement is easy, and energy saving and environmental protection are achieved to the maximum extent.
8. The high-temperature silicone sealing strip and the lockable tension-adjustable door lock are combined to ensure good sealing and prevent heat loss.
9. The unique geometric chamber cleaning design guarantees perfect protection of sample activity.
Product Display:
Item Included:
Electro-thermal Incubator 110V(239959)
Shipping & HandlingDetails
Default Shipping Cost or Free Shipping Information:
▲Defaultshipping cost or free shipping service is only for thecustomers from Canada or the lower 48 United States byCanada Post, USPS orthe UPS Ground.Customers from other areas or needs other shipping ways, please contact us.
▲Buyersfrom Guam,Puerto Rico, Virgin Islands, American Samoa,Alaska,Hawaii,PO Boxes, APO/FPO addresses or othercountries/areas,thereWILL be extra shipping costs, please contact us for more detailedinformation.
▲Pleasemake sure your address is valid for both UPS and USPSservices. Anycosts incurred because of incorrect orundeliverable address shouldbe undertaken by buyer.
Handling Time:Shippingis usually made in 1-3 business days after paymentscleared. Orders are processed fromMonday-Friday; Not on the weekends & publicholidays.
Sales tax/Customsduties:Anysales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.
Damage InShipping:Emailor call us First! We will workwith you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with yourpurchase, please contact Us. Please don\'t directly openeda request or case without informing us, or else, we willdo some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲Allreturns must be made within 14 days of delivery date. Itemsmust be in new, unused condition, with all originalmaterials included with the shipment. A partial refund may be applied for opened or damaged items, depending on thecondition.
▲Itemsreturned under the buyer\'s remorse: The return shipping feemust be covered by the buyer;The original shipping costwill also be deducted from the refund. 15% restocking feeof the items purchase price will be charged.
▲Returnsthat are the result of our seller\'s error: Buyer willreceive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲Ifproduct was received damaged or not as described, pleasesend us some pictures or videos, so we could wellunderstand your problem, then solve them for you ASAP.Besides, it\'s much helpful for us to claim with UPS,remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacementor refund of defective or damaged products can only bereturned in exchange for the exact same product,or else,the purchase price will be refunded back to your originalpayment method.
▲Ifan item is received damaged,customer service must becontactedwithin 7 days of receiving your item. Allreturns require a RA (Return Authorization) number asabove.
Warranty & response
▲6months\' warranty for the machines, not for the consumables.We standbehind our products all the item,so even if yourwarranty periodhas expired, you canstill seek for service or technical supportfrom us with low cost.
▲Anywarranty shipping cost to us is responsible by buyer.
▲Anyshipping cost to buyer is responsible by the seller.
▲Wecommittee to the customer satisfaction and want to bringyou the best purchase experience. If there is anyproblems,please contact us ASAP. If not,please leave usa positive response as it\'s very important for us. Thanksvery much.
On Aug 20, 2026 at 01:54:54 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.