Elecrow ThinkNode M6 Solar-Powered Outdoor Meshtastic Node

Elecrow ThinkNode M6 Solar-Powered Outdoor Meshtastic NodeElecrow ThinkNode M6 Solar-Powered Outdoor Meshtastic Node Solar-Powered Outdoor Mesh Node with GPS The ThinkNode M6 is a self-sufficient outdoor Meshtastic node built for permanent, unattended installation. A 6W solar panel and MPPT controller keep its 7000mAh battery topped off indefinitely, while an IP65 enclosure and a -20°C to 60°C operating range let it run through rain, heat, and cold without a case or cover. It arrives pre-flashed with Meshtastic and includes built-in GPS, so it can go straight onto a roof, pole, or fence line as a always-on relay for your mesh. Highlights 6W monocrystalline solar panel with MPPT charging for continuous, unattended outdoor operation 7000mAh (2x 18650) battery bank with ultra-low standby draw IP65 weatherproof housing rated for -20°C to 60°C operation Nordic nRF52840 MCU paired with the Semtech SX1262 for long-range LoRa Built-in L76K GPS module for location-aware mesh reporting Dual SP11 waterproof aviation ports for IIC/UART sensor expansion Pre-installed Meshtastic firmware, joins a mesh network immediately on first power-on What\'s In The Box 1x Elecrow ThinkNode M6 1x Universal Wall-Mount Bracket 1x LoRa Antenna (868/915MHz) 1x GPS Antenna 1x Screw Package ▸ Technical Specifications Feature Details MCU Nordic nRF52840, Arm Cortex-M4 @ 64 MHz, 256KB RAM, 1MB Flash + 4MB additional storage LoRa Radio Semtech SX1262, 150-960 MHz (US 915 MHz / EU 868 MHz), external antenna GPS L76K module, external antenna Wireless Connectivity Bluetooth 5.4 (BLE) Battery 2x 18650 Li-ion, 7000mAh total, 3.7V-4.2V Solar Panel 6W monocrystalline with MPPT charge controller Power Input USB-C, 5V/1A (charging and firmware flashing) Power Consumption 21µA off, 147mA active with GPS off, 192mA active with GPS on Expansion 2x SP11 waterproof aviation connectors (IIC/UART) for external sensors Enclosure IP65 weatherproof, wall/bracket/pole/U-clamp mountable Operating Temperature -20°C to 60°C (storage: -30°C to 70°C), 10-90% RH non-condensing Controls/Indicators Power button, reset button, power/GPS/LoRa status LEDs Dimensions 210 × 156 × 42mm, 530g Firmware Meshtastic compatible, pre-installed ▸ Compliance & Manual CE & FCC Report User Manual Meshtastic® is a registered trademark of Meshtastic LLC. MeshCore is an open-source mesh networking project released under the MIT License, and its name is currently the subject of an unresolved trademark dispute; it is used here only to describe firmware compatibility. Software components referenced in this listing are released under their respective open-source licenses, see GitHub for details. No warranty is provided, use at your own risk. Always follow best practices for Li-ion battery safety, RF regulations in your region, and safe device operation. Elecrow ThinkNode M6 Solar-Powered Outdoor Meshtastic Node Elecrow ThinkNode M6 Solar-Powered Outdoor Meshtastic NodeSolar-Powered Outdoor Mesh Node with GPS

The ThinkNode M6 is a self-sufficient outdoor Meshtastic node built for permanent, unattended installation. A 6W solar panel and MPPT controller keep its 7000mAh battery topped off indefinitely, while an IP65 enclosure and a -20°C to 60°C operating range let it run through rain, heat, and cold without a case or cover. It arrives pre-flashed with Meshtastic and includes built-in GPS, so it can go straight onto a roof, pole, or fence line as a always-on relay for your mesh.

Highlights

• 6W monocrystalline solar panel with MPPT charging for continuous, unattended outdoor operation
• 7000mAh (2x 18650) battery bank with ultra-low standby draw
• IP65 weatherproof housing rated for -20°C to 60°C operation
• Nordic nRF52840 MCU paired with the Semtech SX1262 for long-range LoRa
• Built-in L76K GPS module for location-aware mesh reporting
• Dual SP11 waterproof aviation ports for IIC/UART sensor expansion

What\'s In The Box

• 1x Elecrow ThinkNode M6
• 1x Universal Wall-Mount Bracket
• 1x LoRa Antenna (868/915MHz)
• 1x GPS Antenna
• 1x Screw Package

▸ Technical Specifications Feature Details MCU Nordic nRF52840, Arm Cortex-M4 @ 64 MHz, 256KB RAM, 1MB Flash + 4MB additional storage LoRa Radio Semtech SX1262, 150-960 MHz (US 915 MHz / EU 868 MHz), external antenna GPS L76K module, external antenna Wireless Connectivity Bluetooth 5.4 (BLE) Battery 2x 18650 Li-ion, 7000mAh total, 3.7V-4.2V Solar Panel 6W monocrystalline with MPPT charge controller Power Input USB-C, 5V/1A (charging and firmware flashing) Power Consumption 21µA off, 147mA active with GPS off, 192mA active with GPS on Expansion 2x SP11 waterproof aviation connectors (IIC/UART) for external sensors Enclosure IP65 weatherproof, wall/bracket/pole/U-clamp mountable Operating Temperature -20°C to 60°C (storage: -30°C to 70°C), 10-90% RH non-condensing Controls/Indicators Power button, reset button, power/GPS/LoRa status LEDs Dimensions 210 × 156 × 42mm, 530g Firmware Meshtastic compatible, pre-installed ▸ Compliance & Manual

• CE & FCC Report
• User Manual

Meshtastic® is a registered trademark of Meshtastic LLC. MeshCore is an open-source mesh networking project released under the MIT License, and its name is currently the subject of an unresolved trademark dispute; it is uséd here only to describe firmware compatibility. Software components referenced in this listing are released under their respective open-source licenses, see GitHub for details. No warranty is provided, use at your own risk. Always follow best practices for Li-ion battery safety, RF regulations in your region, and safe device operation.

× × × × × × × × × ×
Buy now and save! Shipping info

Click the Shipping & Payments tab above the listing description for more info

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT

Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.

Thank you for shopping with us on !

Additional Information

No additional information at this time

Ask seller a question

You might also like 17cm Whip Antenna Case for Lilygo T-Deck - Alley Cat Design Snap-Fit Case for LilyGO T-Deck Heltec T114 V2.0 Pocket Case Contact

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© MakerNova

Shipping & Payments

Click the Shipping & Payments tab above the listing description for more info

Payment

Accepted Payment Methods

Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.

Thank you for shopping with us on !

Returns

Returns are accepted

Items must be returned within 30 days of the sale ending

Buyer will pay for return shipping.

integration by