|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Ecotex® Liquid Tape - Water Resistant Block Out For Screen Printing -Pint / 16oz
$33.94

Ecotex® Liquid Tape - Water Resistant Block Out For Screen Printing-Pint / 16oz For Use With: - Water Based Characteristics:
- Fast Hazardous
- Fills Open Areas
- Good for long print runs
- Simple & Easy To Use
For best results follow the steps below. - When the screen is dry and free of contaminants, put the block out on the print side of the screen and spread it over the open areas until it is completely filled.
- Touch up the defects. This includes blobs of product which tend to dry outside and pop off or smear during printing. When very fine meshes are used you can reduce the viscosity by adding a little bit of water.
Suggested methods for removal: Due to the water resistant nature of this product it is hard to reclaim off of your screen. Please see steps below for suggested methods of removal- Emulsion Remover and a pressure washer. Do not leave emulsion remover on for longer than 1 minute, it will harden the product.
- Hyper Haze (degreaser and ghost remover) and a pressure washer. This product can be left overnight in order to soften the product for removal with the pressure washer
Shelf Life: Payment Shipping We accept payment by any of the following methods: PayPal, Google Pay, Visa, Mastercard, American Express and Discover
We offer FREE shipping on all orders! Your order will be dispatched within 24 hours after receiving payment (Monday-Friday) and you should expect to receive it 2-4 days after dispatch. If order is purchased together with multiple products your order may ship ground 4-5 days.
Our Promise
We promise to always provide affordable high quality products. We also promise to offer the best customer service and best screen printing advice, your success is our success. Our customers are real hustlers and go-getters! We know the humble beginnings of a print shop and your ambitious attitude & drive inspires us daily! If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Shop By DepartmentLiquid Tape Block Out is the ultimate screen block out. This fast drying formula is medium viscosity. It's designed to fill open areas of the screen not covered by the emulsion. This block out is created to handle squeegee abrasion and long print runs. For Use With: ---Water Based Inks ---Discharge Key Characteristics: ---Fast Drying ---Non-Flammable / Hazardous ---Fills Open Areas ---Good for long print runs ---Simple & Easy To Use For best results follow the steps below. ---When the screen is dry and free of contaminants, put the block out on the print side of the screen and spread it over the open areas until it is completely filled. ---Touch up the defects. This includes blobs of product which tend to dry outside and pop off or smear during printing. When very fine meshes are used you can reduce the viscosity by adding a little bit of water. Suggested methods for removal: Due to the water resistant nature of this product it is hard to reclaim off of your screen. Please see steps below for suggested methods of removal ---Emulsion Remover and a pressure washer. Do not leave emulsion remover on for longer than 1 minute, it will harden the product. ---Hyper Haze (degreaser and ghost remover) and a pressure washer. This product can be left overnight in order to soften the product for removal with the pressure washer Shelf Life: ---+12 months Ecotex® Liquid Tape - Water Resistant Block Out For Screen Printing-Pint / 16ozLiquid Tape Block Out is the ultimate screen block out. This fast drying formula is medium viscosity. It's designed to fill open areas of the screen not covered by the emulsion. This block out is created to handle squeegee abrasion and long print runs. For Use With: - Water Based Characteristics:
- Fast Hazardous
- Fills Open Areas
- Good for long print runs
- Simple & Easy To Use
For best results follow the steps below. - When the screen is dry and free of contaminants, put the block out on the print side of the screen and spread it over the open areas until it is completely filled.
- Touch up the defects. This includes blobs of product which tend to dry outside and pop off or smear during printing. When very fine meshes are used you can reduce the viscosity by adding a little bit of water.
Suggested methods for removal: Due to the water resistant nature of this product it is hard to reclaim off of your screen. Please see steps below for suggested methods of removal- Emulsion Remover and a pressure washer. Do not leave emulsion remover on for longer than 1 minute, it will harden the product.
- Hyper Haze (degreaser and ghost remover) and a pressure washer. This product can be left overnight in order to soften the product for removal with the pressure washer
Shelf Life: Payment We accept payment by any of the following methods: PayPal, Google Pay, Visa, Mastercard, American Express and Discover
Shipping We offer FREE shipping on all orders! Your order will be dispatched within 24 hours after receiving payment (Monday-Friday) and you should expect to receive it 2-4 days after dispatch. If order is purchased together with multiple products your order may ship ground 4-5 days.
Our Promise
We promise to always provide affordable high quality products. We also promise to offer the best customer service and best screen printing advice, your success is our success. Our customers are real hustlers and go-getters! We know the humble beginnings of a print shop and your ambitious attitude & drive inspires us daily! If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Shop By DepartmentLiquid Tape Block Out is the ultimate screen block out. This fast drying formula is medium viscosity. It's designed to fill open areas of the screen not covered by the emulsion. This block out is created to handle squeegee abrasion and long print runs. For Use With:

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|