NOTE: we don\'t ship the item to PO BOX address, and we only ship the item to English address, so please leave us your physical English address when you pay.
3 Axis CNC 6040 Router Engraving Machine
Parameters:
Machine Dimensions:
860X690X550mm
Rack material:
6061 and 6063 Hard aluminum alloy
(The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.)
Engraving area:
600X400mm
Z-Axis Stroke:
80mm, Engraving depth depends on the length of the tool edge)
Acceptable material thickness:
≤80mm
Rail type:
Chromeplate shaft+Linear Bearings,)(Surface hardening 61HRC)
Type of screw:
NEW Ball screw1605,Pitch 5mm
Spindle motor:
300W/12000r/min((Very small noise))
Collet type:
ER11,1/8\"(3.175mm) Collet
Stepper motor and drive:
two-phase hybrid stepping motor ,3A/PHASE,150N.cm,8 segments drive.
Maximum operating speed:
4000mm/min (Engraving speed :300-3000mm/min)
Repeat positioning Accuracy:
0.03mm
Communication interface:
Parallel port (Must use the desktop computer, Does not support laptop)
Software Compatability:
Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM,coppercam)
Command code:
G code/.nc/.ncc/.tab/.txt
Machine weight:
60kg
Note: Can’t add the 4thaxis;
Packing list:
1× Engraving machine
1× Control box
1× Parallel port cable 25pin
1× Power cable
1× Tool box and tools
3× Axis motors
1× CD of manual and software MACH3 (if not get, may be lost in customs, please contact us)
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.