ESP32 Programming Module Test Board Burning Fixture System Development Board ...

ESP32 Programming Module Test Board Burning Fixture System Development Board Used for burning:
ESP32-W/ROOM-32D
ESP32-W/ROOM-32E
ESP-S2-W/ROOM
ESP-S3-W/ROOM
ESP-32S
XH-S3E XH-S3E N16R8 Feature:
CPU and On-Chip Memory
ESP32-S3R8 SoCs embedded, dual-core 32-bit LX7 microprocessor, support RTC frequency up to 240MHz
Operating voltage: 3.0V ~ 3.6V
384 KB ROM
512 KB SRAM
16 KB SRAM in RTC
SPI Flash: 16 MB
PSRAM: 8 MB
Peripherals: PWM/ I2C/ UART/SPI/SDIO / IrDA Wi-Fi
802.11 b/g/n
Bit rate: 802.11n up to 150 Mbps
Support A-MPDU and A-MSDU aggregation
Support max 18dBm output power in 802.11b mode
Support STA/APO/STA+AP working mode
Center frequency range of operating channel: 2412 MHz ~ 2484 MHz BT
Low power BLE: BLE 5, BLE mesh
Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
Advertising extensions
Multiple advertisement sets
Channel selection algorithm #2 Peripherals
GPIO, SPI, LCD interface, interface, UART, I2C, I2S, remote control, pulse counter, LED PWM, USB 1.1 OTG, USB Serial/JTAG controller, MCPWM, SDIO host, GDMA, ADC, touch sensor, temperature sensor, timers and watchdogs Operating temeprature: -40°C ~ 105°C
Module size: 18x25.5x3mm
Module power supply:3.3V
Wi-Fi module IO max output current: 12mA
Wi-Fi module RST pin low level active
Wi-Fi module connected to the external MCU: RXD to TXD, TXD to RXD
FLASH download mode: IO0 is at low level, the module is reset and powered on; normal working mode: IO0 is at high level, the module is reset and powered on Application:
Smart Home
Smart Building
Webcams
Wearable Electronics
Wireless Location System Beacons
Industrial Wireless Control
Generic Low-power IoT Sensor Hub
Smart Agriculture
Smart Bus
Wi-Fi-enabled Toys
ESP32 programming test board burning fixture can be used for burning: ESP32-W/ROOM-32D, ESP32-W/ROOM-32E, ESP-S2-W/ROOM, ESP-S3-W/ROOM, ESP-32S, XH-S3E
XH-S3E N16R8: ESP32-S3R8 SoCs embedded, dual-core 32-bit LX7 microprocessor, support RTC frequency up to 240MHz
XH-S3E N16R8 Memory: 384 KB ROM, 512 KB SRAM, 16 KB SRAM in RTC, SPI Flash: 16 MB, PSRAM: 8 MB
Wi-Fi: 802.11 b/g/n; Low power BLE: BLE 5, BLE mesh
Peripherals: PWM/ I2C/ UART/SPI/SDIO / IrDA
What you will get: 1 x ESP32 Programming Module Test Board Burning Fixture + 1 x XH-S3E N16R8 Wi-Fi BLE Module