|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
EP7041-3102 | BECKHOFF | EtherCAT Box 1-Channel Motion Interface + Cables
$349.00

Seller\'s Note: - These EP7041-3102 EtherCAT boxes are surplus asset from automation solution partner, all have been inspected and well-maintained.
- Quantity of 5 available, each comes with EtherCAT cable and power cable (ZK2020-3132-3001) for your flexible addition.
- Please refer to Beckhoff product website for full product details-EP7041-3102 | EtherCAT Box, 1-channel motion interface, stepper motor, 48 V DC, 5 A, for high-speed applications, M12, with incremental encoder | Beckhoff USA
- We offer 30-day return warranty and thank you for your business and ongoing support!
EP7041-3102 | EtherCAT Box, 1-channel motion interface, stepper motor, 48VDC, 5A, for high-speed applications, M12, with incremental encoder The EP7041-3102 EtherCAT Box is intended for the direct connection of different stepper motors. The PWM output stages for two motor coils cover a wide voltage and current range. The EP7041-3102 can be adjusted to the motor and the application by changing just a few parameters. 256-fold micro-stepping ensures particularly quiet and precise motor operation. Connection of an incremental encoder enables a simple servo axis to be realized. Two digital inputs and a digital 0.5 A output enable connection of end switches and a motor brake. The hardware- and software-based configuration make the stepper motor module particularly suitable for applications that are subject to unsteady motor operation due to natural resonance of the motor and the moved mass. The EP7041-3102 supports 5 V DC dataEP7041-3102ProtocolEtherCATBus interface2 x M8 socket, 4-pin, a-coded, shieldedNumber of outputs1 stepper motor, 1 digital 24 V DC outputNumber of inputs2 digital inputs, encoder system (5 V DC encoder)Connection methodM12 socket, 5-pin, a-codedLoad type2-phase stepper motor (uni-/bipolar)Nominal voltage8…48 V DCOutput current2 x 3.5 A, 2 x 5 A peak current (overload- and short-circuit proof)Distributed clocksyesStep frequencyconfigurable up to 8000 full steps/sStep pattern256-fold micro steppingCurrent controller frequencydynamicDiagnostics LEDerror phase A and B, loss of step/stagnation, power, enableResolutionapprox. 5000 positions (per revolution, depending on motor and encoder type)Power supply connectionfeed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-codedElectrical isolation500 VCurrent consumption from US120 mASpecial featuresfor high-speed applications, travel distance control, encoder input, load indication, motor supply via plugOperating/storage temperature-25…+60 °C/-40…+85 °CWeightapprox. 165 gVibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4Protect. rating/installation pos.IP65/66/67 (conforms to EN & ConditionsItem comes as pictured in its present condition with no additional accessories unless stated.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|