|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
EICO Model 625 tube tester FULLY RESTORED
$400.00

EICO 625 tube testercompletely restored.
To ensure functionality and reliability, all vintage tube testers require a comprehensive restoration—regardless of cosmetic condition—as they inevitably show wear from age. Once restored, you will have a fully functional and reliable unit ready for regular use.This complete restoration truly lives up to the definition of the term \"complete restoration\"—unlike other units where only a few components were replaced, yet are still marketed as \"restored\".This Eico tester has undergone a complete cosmetic and electrical restoration.The restoration began with the complete disassembly of all parts. Various restoration techniques were then applied, as described below. Electrical Restoration: - All the wiring was checked according to the schematic; the solder joints were thoroughly checked to verify that they were all quality made. Corrections were made where needed. Defective old cables were removed and replaced with new ones.
- The entire chassis was deeply cleaned.
- Resistors were replaced.
- A new 0.1 capacitor was installed.
- All switches and rotary switches were thoroughly cleaned and lubricated.
- Tube sockets pins and potentiometers were cleaned.Tube sockets in bad shape were replaced.
- The 6H6 tube socket inside the tester was cleaned, the 6H6 tube was checked, it is working good.
- The transformer was checked for proper operation, it is working as it should for element test voltages: 30,110 and 250 Volts AC and for filament voltages: 0.75, 1.4, 2, 2.5, 3.3, 5, 6.3, 7.5, 12.6, 25, 30, 50, 70 and 110 Volts AC.
- Vacuum tube test cap cables were replaced.
- The roll chart mechanism was completely disassembled, cleaned, reassembled, lubed and adjusted for a free operation.
- The roll chart is complete and clear; however, I have included a high quality courtesy copy of the *Eico Tube Data Book* for your convenience, as it provides more comprehensive data and simplifies the tube setup process.In addition, you will receive a supplementary booklet for antique tubes.
- The meter was cleaned.The plastic cover was polished.
- All new rubber grommets.
- A new electric cord and new polarized plug were installed.
- The light bulbs are new.
Cosmetic restoration: - The front panel was thoroughly cleaned, as well as the screws, levers and knobs.
- The cabinet was sanded, primed and repainted.
- The roll chart plastic window was replaced.
- This tester supply correct voltage values according to the line voltage.
- The tester was calibrated and tested for filament and plate voltage values and operating voltages, with satisfactory results.
- Additional extensive testing was performed using reference tubes, validating functionality across \"Good,\" \"Replace,\" and \"Weak\" states, as well as simulating \"Overload\" and \"Short\" conditions, the results from this EICO 625 match the results obtained with my main reference tube tester. This tube tester is fully operational and ready for use.
- A copy of the manual is included.
NO RETURNS
I\'llship the tester very well protected.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|