EASYGUARD Plug Play Remote Starter fit for selected Ford Ranger Everest Explorer 16-21 II Escape Eco sport Transit 17-21 II Focus 16-20 Automation transmission only
Compatible vehicle
Fit for both push button start and turn key start vehicles,
Fit for gas/diesel/hybrid vehicles,
Automation Transmission Only,
Don’t work with manual transmission
3X Lock Remote Start/stop
Note: There is no remote in this kit, use factory original remote/key fobs to remote start/stop. Remote start method: Continue to press original remote lock button 3 times will remote start/stop the car.
No need to change car
Plug and play installation & no damage on car circuitWiring methodProgramming method
Programming Procedure:
Once finished installation, you need to do a new programming.
Before programming, please be sure the ignition is turn OFF.
Step 1: Plug the C power supply connector with the Control Module, then plug the A connector with the control module.
Step 2: Plug the D plug and E plug to the car BCM connector
Step 3: Start the engine via factory key or the push start button, the LED indicator will light Red Green Red in turn. Then shut down the car. Unplug the A connector.
Step 4: Plug the B connector, then start the engine via factory key or the push start button, the LED indicator will light Red first then green color.
Then shut down the car. Programming is finished.
Please keep the B connector plug with the control module during the process.
If the programming procedure is abnormal, please program again till you program it succeed.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.