|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Domino Laser Coder I/O Interface Panel Mains Beacon Interlock Encoder Ports
$428.99

Domino laser coder rear I/O connector / interface panel, removed from working equipment. Brushed stainless faceplate with five cable gland pass-throughs and the factory printed wiring legend.The legend identifies the connector positions: Mains Input, Beacons (9-way: Red N.C./Common/Red N.O./Amber N.C./Amber N.O./Green N.C./Green N.O./Earth), Line Stop, Interlock, Air, Vacuum, and Product Detect or Shaft Encoder (1 = 0 VDC, 2 = NPN A, 3 = NPN, 4 = 12 VDC, 5 = Earth, 6 = NPN B).Condition: used. The plate is scuffed and scratched with some yellow/green staining, and a previous owner wrote 'DOMINO LASER PANEL' on the face in permanent marker. All five glands are fitted; one gland insert is missing its white grommet. The rear gasket is present but compressed and dirty. The printed legend is clear and fully legible.Sold as pictured. No cables, connectors or internal wiring are included beyond the glands and gasket shown. Not tested - offered as a used mechanical/interconnect panel.No manufacturer model number is printed on the panel; identification is from the printed legend and the seller's marking. Condition Used pull from a Domino laser coder. Brushed stainless faceplate shows scuffs, light yellow/green staining and scratches; the seller has written 'DOMINO LASER PANEL' across the front in black marker. Legend label is intact and fully readable; black cable glands are all present, one gland insert is missing its white grommet. Rear foam/rubber gasket is attached but compressed and dirty. Please note - Marker writing across the face
- Surface scratches and scuffing on the stainless plate
- Yellow/green staining on the panel finish
- One gland insert missing its white grommet
- Gasket compressed and soiled
What\'s included - Five black plastic cable glands with lock nuts
- Rear sealing gasket
Details - Mains input connector position
- Beacon (stack light) 9-pin connector position: 1-Red N.C., 2-Common, 3-Red N.O., 4-Amber N.C., 5-Amber N.O., 6-Green N.C., 7-Green N.O., 9-Earth
- Line stop input position
- Interlock connector position
- Air and vacuum connector positions (2/1, 3/4 pin layout)
- Product detect / shaft encoder connector: 1-0 VDC, 2-NPN A, 3-NPN, 4-12 VDC, 5-Earth, 6-NPN B
- 12 VDC encoder supply marked on legend
- Five cable gland pass-throughs
- Screw-mount faceplate with rear sealing gasket
You are buying exactly what is shown in the photos.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|