Digitrax UP5 LocoNet Universal Interconnect Panel and 12 foot LocoNet RJ12 Cable

One Digitrax UP5 LocoNet Universal Panel and One Digitrax OEM 12 foot RJ12 six Pin Connector Cable
The panel and cable have been fully tested (photos) and are in excellent working order. The panel can be connected to the command station or other panels with the supplied cable or if desired the cable can be shortened. Doing this will require adding new RJ12 six pin connectors to the cut ends. Note extra connectors are not included and attaching them requires a special crimping tool.
The panel supports up to three plug in throttles. (The third jack is on the side of the board.)
The panel LED provides a visual track power status indicator. This is especially helpful in identifying which power district has a short and is interrupting operations. The panel can also be used to plug in radio throttles with a weak battery or experiencing reception/transmittal interference. Note. The battery saver circuitry requires adding an external 12 volt DC power supply (not included).
The UP5 and cable instruction sheet is included. Screws for fascia mounting the panels are also included..