Digispark Kickstarter ATTINY13/85/44 Arduino General Micro USB Development Board

Digispark Kickstarter ATTINY13/85/44 Arduino General Micro USB Development BoardProduct Information:Digispark Kickstarter Micro USB development boardThe Attiny10/20/40 microcontroller (MCU) family is optimized for sensing applications such as buttons, sliders and wheels. These devices include AVR MCUs and their patented low-power picoPower technology, ideal for a variety of applications in the cost-sensitive industrial and consumer electronics markets, such as automotive control panels, LCD TVs and monitors, notebook computers, mobile phones, and more.ATTINY13/25/45/85 Board Module Features:
①Pluggable development programming board ATtiny13 /ATtiny25/ ATtiny45/ATtiny85 programmer
②Easy and fast programming
③Development board support chip ATtiny13/ATtiny25 /ATtiny45/ATtiny85, etc.ATTINY85 MICRO Blue/Black Board Module Product parameters:Digispark Micro uses Micro usB interface, and can directly use Micro USB cable (longer and more convenient) to connect to USB interface for program debugging and burning, without USB to serial interface module.
1. Support Arduino IDE1.0+ (Linux/OSX/Win)
2. Can be powered by USB interface or external power supply (5V-16V)
3. Comes with a 5V500mA voltage regulator (PS: 78L05 has only 150mA, and the highest withstand voltage is only 16V)4. Built-in USB debugging (otherwise serial debugging) (connected via Micro usb cable)
5. A total of 6 o ports (if you need to use USB communication, two of them are used to simulate USB interfaces, or you can use all 6 o ports, even if you program and burn through USB)
6. A total of 8KB flash memory space (about 6KB space after Bootloader)
7. Support 2C and sp interface (universal serial interface)
8. Support 3 channels of PWM (more channels of PWM can be simulated by software)
9. Support 4-channel ADC
10. Comes with power indicator and status (test) light.ATTINY44 Board Module Product description:
UsbtinyISP is specially designed for AVR, ISP download based on USB connector. Officially supported by AR IDE and a compatible usbtinyisp, we can burn the AR bootloader onto the chip and actually program any Atmel AVR microcontroller via the powerful AVR ISP programmer.1. The tiny ISP programmer is capable of supplying a 5V supply voltage to the board being programmed.2. If the board is to be powered through the ISP, the SJVCC jumper on the board must be closed. Using this program, you can upload sketches and burn bootloaders on any AVR based board, including AR.3. By uploading the sketch with an external programmer, you can remove the bootloader and use the extra space for the sketch. For AR ISP can also be used to burn the AR bootloader, so if you accidentally damage the bootloader, you can restore the chip. The bootloader also needs to be burned when you are using the new Atmega microcontroller in AR, and you want to use the bootloader to upload the sketch over the USB serial connection.4. Support Attiny45 and Attiny85 chips for AR programming, etc.Product parameters:
Power supply voltage: 5V
Microcontroller: Attiny44 (datasheet)
Connection with computer: micro USB
Connection to target board: ICSP
Board size: 23X14mm (approx.)How to use:
Connect the AR ISP to the ICSP header of the AR board. Make sure to match the orientation of the plug by looking at the white dot on the corner of the connector Turn on ARDE, select the hardware name you downloaded in \"board\" select \"Usbtinylsp\" under the \"Burn Bootloader\" menu, then the bootlaoder starts the download, and at 10 Complete in seconds (atmega328).ATTINY85 USB Black Board Module Interface Description:
1. Support IDE1.0+ (OSX/Win/Linux)
2. Can be powered by USB or 5V or 7-35V (automatic matching) additional power supply
3. There is a 500ma 5V regulator on the motherboard
4.USB embedded (serial port debugging)
5.6 I/O Pins (2 for USB)
6.8k Flash Memory (adout 6k after bootloader)
7. I2C and SPl(vis USI)
8.PWM on 3 pins(more possible with Software PWM)
9. ADC on 4 pins
10. Power LED indicator and Test/Status LED (on Pin0)ATTINY88 Development Board Module Product description:
The MH-ET LIVE Attiny88 (16.0Mhz) microcontroller development board is similar to the Arduino series development board, but it is more cost-effective, smaller and more powerful. Because it can use the familiar Arduino IDE, MH-ET LIVE Tiny88 is a development board that can quickly get started with DIY electronic products, and can well replace other development boards that are too bulky and complicated to assemble.
MH-ET LIVE Attiny88 comes out of the factory except for the included pin headers that need to be soldered by the user, other components have been fully assembled, and the soldering is also convenient and simple.Specifications:
1. Support Arduino IDE1.0+(OSX/Win/Linux)
2. 5V or 7-24V via USB or external power supply (12V or lower recommended, automatically selected)
3. Onboard 500ma 5V regulator
4. Built-in USB
5. 26 I/O pins (2 for USB only if your program is actively communicating over USB, otherwise all 26 are available even after you program over USB)
8k flash (about 6k after bootloader)
6. Onboard l2C and SPI interface
7. With 26 PWM pins (software PWM, hardware PWM only two D9, D10)
8. with 8 ADC pins
9. Power LED and Test/Status LED
10. Volume: 44.5×183x3mmPackage Including:

• According to your choice.