Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

Design Tech AutoCommand KEYLESS CAR STARTER REMOTE KEY FOB TRANSMITTER ELGTRAN

Design Tech AutoCommand KEYLESS CAR STARTER REMOTE KEY FOB TRANSMITTER ELGTRAN
$15.17

Buy Now


One (1)

Aftermarket Security Installed System

remotekeyless entry fob alarm keyfab

car starter engine start Transmitter

control clicker keyfob controller replacement

AutoCommand DesignTech

FCC ID #: ELGTRAN2

Part #: DOC ID: 1476 102 320

20034 Part #: 1476 102 320

Buttons: 1

LED Light Color: Red /Green /Yellow

Frequency: 312 MHz

Battery: 1; CR2032

See Item Specifications for more details

Compatible With The Following Aftermarket Installed Security Systems:

20021

20023

20721

20723

20921

20923

20034

Programming Instructions:

Your transmitter is factory coded to one of over 16,000,000 different codes.

The remote starter module can learn the codes of up to 4 different transmitters.

Once power and the Control switch have been hooked up to the module, the

codes can be learned.

The transmitter should have already come from the factory taught to the

remote starter module. If your unit does not respond to the transmitter in any way -- then you must teach the AutoCommand the code of the transmitter with the following procedure -- otherwise --skip this step:

With the Valet Switch in the ON position:

1. On the remote starter module, put the dip switch marked “1” to the on (down)

position.

2. Watch the green or external dash-mount red LED as you press and hold the left

LOCK button on the transmitter down. When the LED & dash lights come on,

the module has learned the transmitter code. Stop pressing on the transmitter

button

3. To learn additional transmitters (up to 3 more), simply push the left LOCK button on another transmitter for a few seconds until the green response light & dash lights comes on.

4. RETURN DIP SWITCH #1 TO THE UP OFF POSITION!!! A few sec-

onds later the LED and dash lights flash 4 times signifying exiting this

mode.

NOTE:

Teaching new transmitters erases all previously learned transmit-

ters. Thus you must learn all current transmitters at the same time.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design