|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
DORHEA 12Pcs MAX485 Transceiver Module TTL UART Serial to RS485 Instrument Inter
$14.52

- Store
- New Arrivals
- Add to Favorite
- View response
- Contact
DORHEA 12Pcs MAX485 Transceiver Module TTL UART Serial to RS485 Instrument Interface Module Max458 Chip RS-485 Communication Transceiver 5V SCM Development Board Serial Adapters for Raspberry PiDescription Color blue Item Weight 0.06 Kilograms Brand DORHEA Specific Uses For Product Laptop Connector Type Serial Adapter - MAX485 chip is a low power consumption for RS-485 communication, draw between 120µA and 500µA of, limit the slew rate transceiver to allow serial communication over very long cable runs (up 4000 feet / 1200 meters). The 5.08 (mm) pitch 2P terminal, convenient RS-485 communication wiring.Chip leads all pins can be controlled through the microcontroller.
- RS485 transceiver module Serial data can be transmitted in both directions (half duplex) at a data rate up to 2.5Mbps. It is possible to connect multiple modules together for communication between 2 or more devices(up to 32). For even greater distances two modules can be configured as a repeater.
- RS-485 module applicable to Low-Power RS-485 Transceivers, Low-Power RS-422 Transceivers, Level Translators, Transceivers for EMI-Sensitive Applications, Industrial-Control Local Area Networks.
- Supply current when unloaded or fully loaded with disabled drivers. Data connections to the modules are provided by a standard 0.1\"\"\"\" pitch header pins which can also be soldered into standard prototyping PCB and breadboards. Screw terminals provide convention connection to the actual data cable.
- Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.
Product description - Specifications :
- Working Voltage : 5V
- Main Chip : MAX485
- Speeds: up to 2.5Mbit/Sec
- Distances: up to 1200 meters
- Multi-drop supports: up to 32 devices on same bus
- Uses differential signaling for noise immunity
- On board 5.08(mm) 2P connector for RS 485 wires
- All the pins of the chip are brought out, can be controlled by MCUPIN :
- VCC : 5V
- A : Non-inverting receiver input and no-ninverting driver output
- B : Inverting receiver input and inverting driver output
- GND : 0V
- R0 : Receiver output (to rx pin of micro controller)
- RE : Receiver output enable (low to enable)
- DE : Driver output enable (high to enable)
- DI : Driver input (to Tx pin of micro controller)
- Package includes:
- 12 x MAX485 TTL to RS-485 interface module

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|