DIN Rail THC30A THC15A Weekly Programmable Digital Electric Timer Switch Time Re

AC DC means the products can work with AC and DC current

AC means the products only work with AC current.

Features:
DIN Rail Installation
Advanced pre-setting one week before.
Digital electronics time switch with daily and programs
Repeat programs with 20 on/off settings, and manual over-ride
Lithium battery power reserve when electric supply cut off
Auto time error correction±60sec, weekly

Specification:
Voltage: 12V/24V/48V/110V/220V
Load Capacity: 15A 250VAC / 30A 250VAC
Display: LCD
Hysteresis:≤1 sec/day(25℃)
ON/OFF Operation: 20ON & 20OFF
Timer Range: 1min~168h
Service Life: Mechancally 10⁷
Electrically 10⁵
Minimum Interval:1 minute
Switching Contact: 1 changeover switch
Ambient Temperatature: -10 +40℃
Ambient Humidity: 35~85%RH
Installation: 35mm DIN railPacking:
1 x Digital Timer
1 x English Manual

Operating instruction:
1. Press the\"RESET\"key to start the machine
2. To start switch: press RESET Key, at the first time. if you want the present time, please press and hold on Key(not release) on board, then at the same time press D+, H+, M+ to adjust the number to the present time
3.Enter into programming as

Setting1 ON time (display1 on)

2

Press H+/M+

Setting hours and minutes

3

Press D+

To select same every day, or different time each day

4

Press

Setting 1 off time (display 1 off)

5

Press H+/M+

Setting hours and minutes turn off time

6

Press D+

lf you want the same every day, you need not press this key

7

Repeat step2-6

Set 2-20 on/off time

8

Press

End

If you do not need 20 settings, press to the end

Note:
1 . Time seting should according to the time sequence, couldn\'t be set crossly
2. System with quit automatically if there\'s no operating within 10 seconds and no data is saved.
3. Function 3,4,5 can not be used simultaneously.
4. If not used for a long time, please press \"H+\" and \"D+\" key for 2 seconds to turn off

Wiring WayDimension