|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
DEVASYS USB-I2CIO REV C1 DEV BOARD USB TO I2C WITH I/O
$54.95

DEVASYS USB-I2CIO REV C1 The USB-I2C/IO interface board provides a simple, \"drop-in\", solution for customers that need to connect hardware to a PC. The new Rev. C1 board provides up to 32 bits of user-configurable digital I/O, an I2C/SMBUS interface with a configurable clock (100Kbps, 400Kbps, 1Mbps, etc.), and more.Key Features: 12 Mbps USB 2.0 interface (full-speed device) to host PC Silicon Labs C8051F340 microcontroller (48 MHz, 63 KB flash, 4 KB SRAM, USB, I²C/SMBUS, SPI, etc.) Up to 32 bits of user-configurable digital I/O via standard 0.1\" spacing connectors I²C/SMBUS multi-channel interface with configurable clock speeds Onboard 16 KB I²C EEPROM (fully available to user; on its own I²C bus segment for isolation) 5‑pin connectors for attaching external I²C hardware USB Status LED: lights on enumeration, blinks to indicate USB traffic, off when suspended Error LED: indicates firmware-detected errors; readable and clearable via API Small form factor: 3.0\" × 2.25\" with 0.125\" mounting holes in corners Downloadable board firmware for easy updates and code customization Included API software (Windows DLL in C) to get your application running quickly
Applications: USB → I²C/SMBUS bridge for interfacing with a variety of components USB → general purpose digital I/O for switches, LEDs, and other hardware Low-cost prototype hardware for developing C8051F340 microcontroller projects Test fixture interface Rapid prototyping Data acquisition
Hardware Details: Full-speed USB provides hot plug & play, 12 Mbps, industry-standard connection to PC host Uses Silicon Labs C8051F340 USB microcontroller Power configuration jumper allows board to be powered by USB or external circuitry I²C power configuration jumper allows bus power from +5 V, +3.3 V, or external source Debug connector footprint enables development of your own C8051F340 projects EEPROM Write Protect jumper prevents accidental onboard EEPROM erasure

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|