|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
DC3-6V 28-1500mA Adjustable Output Current LED Driver Module PWM Controller
$1.38

Description:Working voltage : DC 2.9-6.1V(Perfect for 3V 3.3V 3.7V 5V 6V LED Driver) Output Current: 28-1500MA
Maximum output power: 8W Output Current Accuracy: ± 5% Low Dropout Voltage: 0.37V @ 1.5A Can drive 1-16pcs 2.9-6.1V LEDs (maximum current does not exceed 1.5A) Current regulation: 1 through adjustable resistance; 2 through PWM control
Chip Temperature Regulation Over LED Current Protection Operating Temperature Range: -40 ℃ to +85 ℃
Size : 20mm x 10mm x 2.8mm Weight : about 0.6g Application 1: Wiring in accordance with the following figure, use a suitable screwdriver gently and slowly rotate the adjustable resistance. Application 2: Adjust the adjustable resistance to 0 ohms (or maximize the current according to Application 1) and then use the MCU output PWM signal to control the LED output currentthe frequency of the PWM signal should be less than 2KHzLD1500SB is a current regulation integrated circuit operating from an input voltage of 2.9V to 6.1V, the constant output current can be set up to 1.5A with an external resistor. The LD1500SB consists of high precision reference voltage, amplifier, current mirror, etc. The on-chip power transistor and current sense block greatly reduce the external component count, which makes the LD1500SB ideal for LED driver.
When the EN pin is high, the input voltage is greater than 2.9V, and is larger than the LED forward voltage plus the required voltage drop, LD1500SB functions normally to deliver constant current from the LED pin.
The LD1500SB adopts the temperature regulation instead of temperature protection function, the temperature regulation can make the LED being turned on continuously in case of high ambient temperature or high voltage drop. When the LD1500SB junction temperature reaches about 135 ° C, the internal temperature regulation block reduces the LED current so that the junction temperature will not rise any more. This feature allows the users to maximize the use of the power handling capability of the chip, do not worry about the chip overheating and damage to the chip or external components.
The LD1500SB also has the chip enable function, which can shutdown the whole chip to limit the current consumption within 1uA.
The LD1500SB also adopts the over current protection block. When LED current approaches 0.9A(Typical), the over current protection block begins to function to prevent the LED current from increasing further.Package Included : 1PCS Package includes: DC3-6V 28-1500mA Adjustable Output Current LED Driver Module PWM Controller Payment Payment Payable To Note PayPal All payments are due within 7 days of the close of sale. Failing to do so, non-paying buyers will be reported to . Shipping Policy Delivery Time We ship to worldwide, it usually takes 10-30 Business Days to delivery. Shipping address We ship to your PayPal address. Please, make sure to provide us with correct, precise, and detailed shipping Address. Send Time Items will be shipped within 1 to 3 business days upon payment received or cleared. Note If you don\'t receive items over 30 business days, please notify us via message. Return Policy We appreciate your business and offer an instant 7 days return policy.(7 days after receive the item). The returned item has to be in its original condition. We are able to refund your money without shipping cost. Contact us For anything about product, price, shipping or order status, please contact us via message. We love positive response and 5 scores DSR. We will leave it for everyone that leaves it for us.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|