|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
DC 12V 3 Channel PWM PC CPU Fan Temperature Speed Controller Alarm Probe
$115.99

🌬️ DC 12V 3-Channel PWM Fan Temperature Controller — PC / CPU Speed Control with AlarmCompact 12V PWM fan speed controller designed for automatic temperature-based fan control in PC cooling, electronics enclosures, DIY equipment, and other low-voltage airflow applications. This module supports 3 fan channels, includes a high-accuracy NTC temperature probe, and adds stall alarm support with a buzzer for extra protection and monitoring.It is a strong fit for users who want a compact board that can automatically increase fan speed as temperature rises, while also supporting manual setup of temperature zones and alarm behavior.🔧 Key Features ⚡ DC 12V Operation: designed for 12V fan-control applications 🌡️ Automatic Temperature Control: fan speed changes according to the selected temperature zone 🌀 3-Channel Fan Output: supports multiple fans for broader cooling coverage 📈 PWM Speed Regulation: smooth speed control across the listed PWM range 🧠 4 Temperature Zones: selectable thermal behavior using onboard DIP switches 🚨 Stall Alarm Support: buzzer / warning function for compatible monitored fan channels 🔍 NTC Temperature Probe Included: sensor included for thermal response and control 🏭 High-Efficiency Design: synchronous rectifier output for efficient operation per supplied spec🆚 Control Logic (read before setup)FAN1 Minimum PWM Setting — TFL Switch TFL ON: FAN1 minimum PWM = 40% TFL OFF: FAN1 minimum PWM = 20%Temperature Zone Selection — TP1 / TP2 TP1 OFF + TP2 OFF: accelerate at 35°C / full speed at 45°C TP1 ON + TP2 OFF: accelerate at 40°C / full speed at 55°C TP1 OFF + TP2 ON: accelerate at 50°C / full speed at 70°C TP1 ON + TP2 ON: accelerate at 60°C / full speed at 90°CHow it behaves: When temperature is below the selected accelerate threshold, the fan runs at the minimum configured speed. When temperature rises beyond the selected full-speed threshold, the controller drives the fan at full speed.Stall Alarm — BF1 / BF2 BF1: enables stall alarm for FAN1 BF2: enables stall alarm for FAN2 If the corresponding monitored fan stops, the controller can trigger an audible and visual alarm using the included buzzer.⚙️ Core Features Working Voltage: DC 12V Fan Support: compatible 12V fans within the listed electrical limits Control Style: PWM automatic temperature speed control Sensor Type: NTC thermistor temperature probe Alarm Type: stall warning with buzzer for configured channels Board Use: PC / CPU / enclosure / electronics cooling applications📐 Key Specifications Working Voltage: DC 12V Maximum Current Per Output: 5A Maximum Total Bus Current: up to 9A Channel 1 PWM Range: 20%–100% or 40%–100% (depending on TFL setting) Channel 2 and Channel 3 PWM Range: 10%–100% Temperature Probe: 50K, B = 3950 Temperature Zone Error: generally about 3–5% depending on the probe Stall Alarm Minimum Speed: about 700–800 RPM Thermistor Description: high-accuracy NTC thermistor sensor module, 3950K B-value, 10KΩ R25, 0.1% sampling resistor accuracy (per supplied spec)🧠 Quick Selection Guide Need fans to speed up automatically as temperature rises? This module is built for that job. Need different thermal behavior for different projects? Use the TP1 / TP2 temperature zone settings. Need a minimum baseline speed on FAN1? Adjust it with the TFL switch. Need alarm warning if a monitored fan stalls? Enable BF1 and/or BF2 and use the included buzzer.🧰 Typical Uses PC and CPU cooling projects Electronics enclosure cooling Amplifier / PSU airflow control DIY cabinet and box ventilation Thermal protection builds Fan-based cooling automation projects🔌 Wiring & Safety Use a stable DC 12V power source only. Connect only compatible 12V fans within the listed current limits. If multiple fans are connected in parallel, keep the combined current within the stated board limits. Actual speed-control behavior may vary depending on the fan model and PWM compatibility. Mount the temperature probe where it reflects the real thermal point you want to control, not directly in high airflow unless that is intentional.⚠️ Important Notes This is a 12V fan controller, not a universal motor controller. The supplied specs mention parallel fan use, but the total current must still remain within the board limit. Stall alarm support depends on the fan channel configuration and compatible fan monitoring behavior. The actual control effect can vary depending on the fan used. Always test the full setup before final installation in a closed system.📦 Package Includes 1 × Speed controller 1 × Temperature probe 1 × Buzzer💥 Volume Discount — Buy More & Save• 10% OFF when you buy 2 units• 15% OFF when you buy 3 units• 20% OFF when you buy 4 or more units Discount auto-applied.🇺🇸 Premium Support & Shipping• US Stock / Fast Shipping — 2–4 day delivery from Oklahoma, USA. Your purchase supports a US-based small business.• 🧪 Quality Checked & Tested — spot-checked before shipping.• 🔁 Easy Returns — 30-day returns; we pay return shipping.• 📦 Professional Packaging — safe delivery, 100% guaranteed.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|