Overview
This is a DBX Model 224 Type II Tape Noise Reduction System, part of the Recording Technology Series, designed for enhancing audio quality in tape recording and playback by reducing unwanted noise.
What\'s Included
- DBX Model 224 Type II Tape Noise Reduction System
- Attached AC power cord
Condition
The unit is in good cosmetic condition. There are minor scuffs and marks on the top and sides consistent with normal use. A sticker with \'2965\' is present on the top left of the front panel. The front panel and rear connections appear clean. The power cord is neatly tied.
Testing Notes
The unit powers on. Although not thoroughly tested, it is guaranteed to be in full working DBX
Model: 224Type: Type II Tape Noise Reduction SystemChannels: 2Input sensitivity: 300mV (6V max)Output level: 5V (max)S/N improvement: 30-40dB (dbx II)Dynamic range: 110dBFrequency response: 30Hz to 20kHzTotal harmonic distortion: 0.5%Voltage: 117VPower Consumption: 7 WattsDimensions: Approximately 20 x 6 x 2 inches (437 x 440 x 179mm)
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.