Available here is an analog voltage output module from Dataforth, model SCM5B49-05.Each SCM5B49 voltage output module provides a single channel of analog output. The track-and-hold circuit in the input stage can be operated in a hold mode where one DAC can supply many output modules, or a track mode where one DAC is dedicated to each module. In addition to the track-and-hold circuit, each module provides signal buffering, isolation, filtering, and conversion to a high-level voltage output.Setting of the track or hold mode is controlled by the logic state of WR EN\\, module pin 23. When pin 23 is low, the track mode is enabled. If pin 23 is high, the hold mode is enabled. The module is designed with a completely isolated computer side circuit which can be floated to ±50V from Power Common, pin 16. This complete isolation means that no connection is required between I/O Common and Power Common for proper operation of the track and hold circuit. For a low state, simply connect pin 23, the Write-Enable pin, to I/O Common, pin 19.The SCMPB02 and SCMPB06 backpanels allow host computer control of the WR EN\\ control line, which allows multiplexing of one host DAC to up to 64 SCM5B49 output modules.If you have any questions, please do not hesitate to ask. DATAFORTH Analog Wide Bandwidth Isolated Voltage Output Module, SCM5B49-05 DATAFORTH Analog Wide Bandwidth Isolated Voltage Output Module, SCM5B49-05 Description
Available here is an analog voltage output module from Dataforth, model SCM5B49-05.
Each SCM5B49 voltage output module provides a single channel of analog output. The track-and-hold circuit in the input stage can be operated in a hold mode where one DAC can supply many output modules, or a track mode where one DAC is dedicated to each module. In addition to the track-and-hold circuit, each module provides signal buffering, isolation, filtering, and conversion to a high-level voltage output.
Setting of the track or hold mode is controlled by the logic state of WR EN\\, module pin 23. When pin 23 is low, the track mode is enabled. If pin 23 is high, the hold mode is enabled. The module is designed with a completely isolated computer side circuit which can be floated to ±50V from Power Common, pin 16. This complete isolation means that no connection is required between I/O Common and Power Common for proper operation of the track and hold circuit. For a low state, simply connect pin 23, the Write-Enable pin, to I/O Common, pin 19.
The SCMPB02 and SCMPB06 backpanels allow host computer control of the WR EN\\ control line, which allows multiplexing of one host DAC to up to 64 SCM5B49 output modules.
If you have any questions, please do not hesitate to ask.
Click images to enlarge
Pictures sell!
Auctiva offers Free Image Hosting and Editing.300+ Listing Templates!
Auctiva gets you noticed!
The complete Selling Solution.
Track Page Views With
Auctiva\'s Counter
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.