Custom Length Eurorack Rails, 118HP - 178HP w/ Slide Nuts or Threaded Nut Strips
$34.49

Important: Please use the comments box or an message to specify the length in HP (or length in cm or inches if not an exact HP length).
Orders without a length specified will be canceled.If you need shorter rails, you can grab them anything into a Eurorack case! These rails are cut to length for use in whatever DIY housing you like: a suitcase, coffee table or Grandma\'s meatloaf pan.* Four 10-24 x 1\" mounting screws are included (to screw the rails into your case).Choose slide nuts or custom length threaded nut strips (TNS). If you aren\'t sure which one you need, check out the picture that explains the difference.Sold in pairs.Dimensional info:- Minimum rail length: 20HP (4 inches or 10cm)- Maximum rail length: 178HP (35.6 inches or 90.4cm)- Rail height/depth: 9/32 x 7/8 inches (7.4 x 22.2mm)Measurement conversion: There are 5HP in one inch, so 0.2 inches equals 1HP. Converting is simple:- From inches: inches x 5 = HP- From centimeters: (cm ÷ 2.54) x 5 = HPThreaded nut strips:- Rails that are longer than 84HP will have two nut strips with slight gap between.- Please note that our nut strips are cut one HP short. This gives a little wiggle room on either side of the rail, which is often needed. If you would prefer the full length, please make a comment at checkout.Please note: Assembly required.Returns: Since this is a customized product, we do not offer returns for custom length rails.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.