Controller Diesel HAT310-S01 ATS Generator Control Panel Module 120VAC 50-60Hz

Description:

Controller Diesel HAT310-S01 ATS Generator Control Panel Module 120VAC 50-60Hz

Description:

HAT310-120V controller can detect 3-phase 4-wire mains voltage/generator single phasevoltage and control ATS.
Main characteristics are as follows:
1) With aotomatic charge and automatic recorvery function.
2) With under volatge and loss of phase detection function.
3) LED indicators on the pannal can show working status of controller clearly.
4) Applicable for 2 isolated neutral line.
5) Mains normal delay configured via potentiometer (range: 1~60s), and generator normal delay viapotentiometer (range: 1~60s).
6) Mians is unavailable, if any phase voltage belows minimum working voltage or phase loss occurredgen-set will be started.
7) Output contact capacity of mains and generator transfer relay is 16A AC120V, which can directlyused to drive switch conversion.
8) Output contact capacity of GENS START relay is 16A AC120V, it is volt freenormally-open/normally-closed contect.
9) Strong anti-electromagnetic interference performance enable controller to use in the enviromentwith strong electromagnetic interfrence.
10) Modular design, self extinguishing ABS plastic shell, pluggable terminal, compact structure;
11) Two installation ways: internal 35mm slideway and internal screw mounting.

HAT310-120V ATS Controller is suitable for 2-stage of PC, and ATS of CC class (close signal isconstant output). It can accurately detect 3-phase 4-wire mains voltage and generator single phase voltage. When mains under voltage and loss of phase occurred, HAT310-120V will control ATS transferafter delay. If mains are unavailable, the controller has the function to initiate signals to start gen-set.

Feature:
High performance,reliable quality.
We work with every effort to provide quality products and professional service.

Specification:

Operating Voltage: AC power A1N1/A2N2 supply，Rated AC120V (range: AC90~150V)
Power Consumption: Under rated voltage, power consumption of voltage circuit is not more than 2W
AC Voltage Input: 3-phase 4-wire (120/208 VAC),2 phase 3-wire (120/240VAC),single-phase 2-wire (120VAC): AC70V - AC150V (ph-N)
AC Frequency: 50/60Hz
Gens-set Starter Relay: 16A 120V AC Volts free output (Normally close)
Mains Close Relay: 16A 120V AC AC Supply output (Normally open)
Gen Close Relay: 16A 120V AC AC Supply output (Normally open)
Case Dimensions: 110mm×77.5mm×55mm
Screw Mounting Dimensions: 65mm×65.1mm
Working Conditions - Temperature: (-25~+70)°C
Humidity: (20~93)%RH
Storage Condition - Temperature: (-25~+70)°C
Insulation Strength: Apply AC1.5kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within 1min.

About Delivery:
We have warehouses in California and New Jersey.
We will follow the principle of nearest delivery.
When one warehouse is out of stock, it will be shipped from another warehouse.
Thank you for your understanding.

Package Product List:

1 ×HAT310-S01 ATS Controller 120VAC

Item SpecificsCountry of Origin United StatesBrand marddpairMPN AMZ2197386Model HAT310AC Frequency 50/60HzWorking Conditions - Temperature (-25~ 70)°CHumidity (20~93)%RHStorage Condition - Temperature (-25~ 70)°COperating Voltage AC power A1N1/A2N2 supply，Rated AC120V (range: AC90~150V)Warranty 1 YearWarranty 1 Year
About us

*. it is preferable that you email us. We will try to answer most emails within 3 days.E043

Shipping

*. We will delivery the package within 3 business day after your payment is cleared by PayPal.

*. We Ship from USA stock! Fast shipping!

Payment

*. We accept Paypal ,Google pay, Visa,Master Card, American Express, Discover. Mastercard etc.

*. After sale closing，pay as soon as possible.

Contact Us

• *. We are open Monday to Friday 8am to 5:30pm Pacific Standard Time, and Saturday 8am to12noon . Our friendly staff are available during these hours. Please feel free send us a message via .

Terms of sales

*. All the items are double checked before shipment, if the item is defect when you recieve it, please contact us for help, we will respond you within 24 hours and resolve your issue asap.

*. If you are not satisfied with the transaction, please contact us . we'll do our best to solve your problems.

*. If you are satisfied with your purchase and services, please give us a positive assessment and comprehensive assessment, the four to five stars.

Hand ToolsEdge finderCollet ChuckTool Post Controller Diesel HAT310-S01 ATS Generator Control Panel Module 120VAC 50-60Hz

Description:

HAT310-120V controller can detect 3-phase 4-wire mains voltage/generator single phasevoltage and control ATS.
Main characteristics are as follows:
1) With aotomatic charge and automatic recorvery function.
2) With under volatge and loss of phase detection function.
3) LED indicators on the pannal can show working status of controller clearly.
4) Applicable for 2 isolated neutral line.
5) Mains normal delay configured via potentiometer (range: 1~60s), and generator normal delay viapotentiometer (range: 1~60s).
6) Mians is unavailable, if any phase voltage belows minimum working voltage or phase loss occurredgen-set will be started.
7) Output contact capacity of mains and generator transfer relay is 16A AC120V, which can directlyused to drive switch conversion.
8) Output contact capacity of GENS START relay is 16A AC120V, it is volt freenormally-open/normally-closed contect.
9) Strong anti-electromagnetic interference performance enable controller to use in the enviromentwith strong electromagnetic interfrence.
10) Modular design, self extinguishing ABS plastic shell, pluggable terminal, compact structure;
11) Two installation ways: internal 35mm slideway and internal screw mounting.

HAT310-120V ATS Controller is suitable for 2-stage of PC, and ATS of CC class (close signal isconstant output). It can accurately detect 3-phase 4-wire mains voltage and generator single phase voltage. When mains under voltage and loss of phase occurred, HAT310-120V will control ATS transferafter delay. If mains are unavailable, the controller has the function to initiate signals to start gen-set.

Feature:
High performance,reliable quality.
We work with every effort to provide quality products and professional service.

Specification:

Operating Voltage: AC power A1N1/A2N2 supply，Rated AC120V (range: AC90~150V)
Power Consumption: Under rated voltage, power consumption of voltage circuit is not more than 2W
AC Voltage Input: 3-phase 4-wire (120/208 VAC),2 phase 3-wire (120/240VAC),single-phase 2-wire (120VAC): AC70V - AC150V (ph-N)
AC Frequency: 50/60Hz
Gens-set Starter Relay: 16A 120V AC Volts free output (Normally close)
Mains Close Relay: 16A 120V AC AC Supply output (Normally open)
Gen Close Relay: 16A 120V AC AC Supply output (Normally open)
Case Dimensions: 110mm×77.5mm×55mm
Screw Mounting Dimensions: 65mm×65.1mm
Working Conditions - Temperature: (-25~+70)°C
Humidity: (20~93)%RH
Storage Condition - Temperature: (-25~+70)°C
Insulation Strength: Apply AC1.5kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within 1min.

About Delivery:
We have warehouses in California and New Jersey.
We will follow the principle of nearest delivery.
When one warehouse is out of stock, it will be shipped from another warehouse.
Thank you for your understanding.

Package Product List:

1 ×HAT310-S01 ATS Controller 120VAC

About usShippingPaymentContact UsTerms of sales

*. it is preferable that you email us. We will try to answer most emails within 3 days.E043

*. We will delivery the package within 3 business day after your payment is cleared by PayPal.

*. We Ship from USA stock! Fast shipping!

*. We accept Paypal ,Google pay, Visa,Master Card, American Express, Discover. Mastercard etc.

*. After sale closing，pay as soon as possible.

• *. We are open Monday to Friday 8am to 5:30pm Pacific Standard Time, and Saturday 8am to12noon . Our friendly staff are available during these hours. Please feel free send us a message via .

*. All the items are double checked before shipment, if the item is defect when you recieve it, please contact us for help, we will respond you within 24 hours and resolve your issue asap.

*. If you are not satisfied with the transaction, please contact us . we'll do our best to solve your problems.

*. If you are satisfied with your purchase and services, please give us a positive assessment and comprehensive assessment, the four to five stars.

All rights reserved.

On Sep 11, 2026 at 01:21:05 PDT, seller added the following information: