Control Board 2304012 For Power Drive Foot Pedal
Replacement for part numbers 2304012, 2774012.
This board is an aftermarket replacement that will get your motor running again!
You will need to perform a simple soldering job to connect the color coded wires on your cable to the new board.
Does not fit the newer V2 pedals.
Material: The Power Drive foot pedal control board typically uses FR-4 fiberglass epoxy resin circuit board, ABS or PA66-GF30 engineering plastic housing, tin plated copper terminals, MOSFET power devices, and aluminum alloy heat sinks.
Operating power: The control board usually uses 12V or 24V DC power supply, and its standby power consumption is generally less than 5W. The controllable motor load power is usually about 100-500W, and the specific specifications are based on the 2304012 model.
Purpose: Suitable for Power Drive foot pedal system, used to replace control board part number 2304012, control foot pedal motor or actuator.
Work function: It receives signals from foot pedal switches, position sensors, or controllers, and adjusts the start, stop, direction, and running speed of the motor.
Working principle: The DC power supply enters the control board through a fuse, and the microcontroller drives the MOSFET or relay according to the input signal, so that the motor obtains the corresponding voltage and current, thereby completing the extension or retraction action of the foot pedal.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.