Cognex DM50X Barcode Scanner Reader 825-0404-IR 03
$99.97

These were pulled from working environment and may have minor scuffing. RS-232 Plug has been removed - will need to be replaced, or used as needed for your situation. Please see pictures of the Molex plugs on unit. Remaining wires are in the cable and can be used.
I/O Cable The I/O cable provides access to trigger and high-speed outputs. Unused wires can be clipped short or tied back using a tie made of non-conductive material. For RS-232, use the Power Supply return path for ground. Note: GND (Pin 4) is connected to the reader housing, cable shield, and DB15 shell. This is a male connector/plug.
PIN Color Signal1 Brown Reserved2 Green TxD3 Green/Black RxD4 Red and Brown/White GND5 Red/Black DC+ (system power, 5-24 VDC)6 Blue RTS7 Blue/White Output-08 White Input-09 White/Black Input-110 Light Blue CTS11 Light Blue/Black Output-112 Light Blue/Yellow Output-Common13 Light Blue/Green Output-Strobe14 Yellow Reserved15 Yellow/Black Reserved
Thank you for visiting today. All of the products listed on this store are here in the USA and ship on the next business day.Please note that some of the packages may have some wear. Everything is inspected whenever possible.If you have any questions - Please Ask.At our option we try to ship USPS Ground Advantage whenever possible.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.