Keyless entry remote comes with DIY FREEProgramming instructions
See pictures for an example of what youwill receive.
One (1)
Aftermarket Security Installed System
remote keyless entry fob alarm controller
Transmitter control clicker keyfob controllerreplacement
Code Alarm
FCC ID#: H5OT45
Alternate Spelling: H50T45
Part #: CATX-1B
LED LIGHT: Red
Buttons: 1; Car Vehicle Engine Starter
Frequency: 434 MHz
Battery: 1; CR2032
See Item Specifications for more details
Compatible With the following Aftermarket installed security systems:
CA4050, CA4051, CA4053, CA4054, CA4552, CA4553, CA4554, CA4055, CA4555, Panther PA420C & 41800252
Made for the following Code Alarm Type 9 systems:
- CA100
- CA1045
- CA1050
- CA1051
- CA1053
- CA1055
- CA1150
- CA1151
- CA1153
- CA1155
- CA1550
- CA1551
- CA1552
- CA1553
- CA1B
- CA1B5
- CA1BTW
- CA1BTW5
- CA2050
- CA2051
- CA4051
- CA4053
- CA4054
- CA4055
- CA4552
- CA4553
- CA4554
- CA4555
- CA5050
- CA5051
- CA5053
- CA5054
- CA5055
- CA5150
- CA5152
- CA5153
- CA6151
- CA6153
- CA6550
- CA6551
- CA6552
- CA6553
Replaces the following Code Alarm remotes:
- CAT1
- CAT1MTW
- CAT4P
- CATX1B
- CATX1TW
- CATX4
- CATX50
- CATX100
- CATXMLC
- CATXMT
- CPL100TX
- TCBMLC
- TCBMT
- TCBTX4
Programming:
Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand.
- Turn the ignition key to the on position..
- Press and HOLD the valet/programming switch. Parking lights will flash 3 times. Release the Button.
- Press the Lock or Start button of each transmitter you want programmed. You will see 1 light flash from each accepted transmitter.
- Turn the ignition switch off.
NOTE: Please make sure you have a working control unit installed in the vehicle prior to ordering this remote control. Programming instructions are listed above and will require accessing your valet/programming switch.
Programming Instructions:
Turn the ignition ON.
Press and hold the valet/override button.
Within 10 seconds the system will chirp (3) three times.
Press 1 button of each transmitter you wish to program.
The system will respond with 1 light flash for each accepted transmitter.
Pressing the override button at any time during programming will advance to the next bank.
NOTES:· The system will exit transmitter programming after 15 seconds of inactivity.
· This system has 1 button programming which programs all channels of the system.
If you\'re notsure your vehicle can use thisremote, please ask questions or contact your local dealer first.
Yourvehicle will be installed with one of the following keyless entry systems:
Theabove information can change which remote you need
for your installed remote keyless system.
100%Guarantee Remote Shipping / Return Policy
- We have a 30 day return policy.
- All returns for replacements and refund need an RMA #.
- Please contact us before returning items so we can give you theRMA # and the proper return address.
- No refunds / replacements will be granted without an RMA#
Yes. It will have a working batteryinstalled.
Battery Condition:

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.