Overview
This professionalTrue RMS Clamp Multimeteris specifically designed for HVAC/R technicians, refrigeration specialists, and field service professionals who demand accuracy, reliability, and convenience in daily troubleshooting.
With6000 counts auto-rangingdisplay,26mm jaw opening, andBluetooth APP connectivity, this meter allows you to measure voltage, current, resistance, capacitance, frequency, duty cycle, temperature, and perform non-contact voltage detection — all from a safe distance of 10–15 meters via your smartphone.
Whether you are diagnosing compressor startup currents, checking capacitor health, measuring superheat/subcooling temperatures, or tracing live wires behind panels, this clamp meter delivers dependable True RMS readings on both linear and non-linear loads.
Key Features for HVAC/R Professionals
True RMS AC/DC Current Measurement– Accurately measures up to 400A AC/DC on non-linear loads commonly found in VFD drives, motors, and electronic ballasts.
Type-K Thermocouple Input– Measures temperature from-20°C to 1000°C (-4°F to 1832°F)with ℃/℉ switchable, essential for superheat and subcooling AC Voltage (NCV) Detection– Detects live voltage from90V to 1000V ACwith both audible buzzer and bright LED lamp alert — ideal for quickly identifying energized wires without stripping insulation.
Capacitance Measurement– Tests motor start/run capacitors from6nF to 60mFwith dedicated ranges to verify if they are within tolerance.
Diode Test & Audible Continuity– Built-in buzzer sounds and lamp lights up when resistance is below approximately50Ω, making circuit tracing fast and hands-free.
Bluetooth APP Remote Monitoring– Connects to your smartphone via the free \"Intelligent Meter\" APP (iOS 7.0+ / Android 4.30+). View real-time readings, record MAX/MIN values, track averages, and export historical data for service reports.
MAX/MIN & Data Hold– Capture peak values during start-up surges or lock the display for safe reading in tight spaces.
Backlight & Work Light– Long-press the HOLD button to activate the backlight and front-facing LED lamp — essential for working in dim mechanical rooms or outdoor night calls.
Auto-Ranging & Manual Function Selection– SEL button lets you quickly toggle between resistance, continuity, diode, capacitance, DC/AC voltage, and ℃/℉ temperature.
Technical Specifications (HVAC-Relevant Ranges)FunctionRangeAccuracyDC Voltage600mV / 6V / 60V / 600V±(0.5%~0.8% + 2 digits)AC Voltage (True RMS)6V / 60V / 600V±(1.0%~1.5% + 3 digits)DC Current (Clamp)60A / 400A±(2.5%~3.0% + 10 digits)AC Current (True RMS, Clamp)60A / 400A±(2.5%~3.0% + 10 digits)Resistance600Ω ~ 60MΩ±(1.0%~1.5% + 2~3 digits)Capacitance6nF ~ 60mF±(3.0%~10.0% + 10~20 digits)Frequency9.999Hz ~ 9.999MHz±(0.1% + 5 digits)Duty Cycle0.1% ~ 99.9%±(2.0% + 2 digits)Temperature (K-Type)-20~1000℃ / -4~1832℉±(3℃~3% + 1~2 digits)NCV Detection90V ~ 1000V ACVisual & Audible AlertGeneral SpecificationsDisplay Count6000 digitsJaw Opening26mm (fits most HVAC conductors)Safety RatingCAT II 600V / CAT III 300V, Double Insulation (Class II)Bluetooth Range10 ~ 15 meters (30~50 ft)Operating Temperature0℃ ~ 40℃ (32℉ ~ 104℉)Dimensions207 x 75 x 37 mmWeightApprox. 280gWhat\'s Included in the Package
1 x Clamp Multimeter (main unit)
1 x Pair of Test Leads (600V 10A rated)
1 x Type-K Thermocouple Temperature Probe
1 x User Manual (English)
(Batteries not included. Requires 2 x AAA 1.5V batteries for operation.)
Operating Tips for HVAC Applications
Measuring Compressor Start/Inrush Current– Use the MAX/MIN function to capture the peak current during compressor startup. Select the 400A range before clamping.
Checking Run Capacitors– Fully discharge the capacitor before testing. For capacitance above 600µF, allow up to 10 seconds for the reading to stabilize.
Superheat & Subcooling– Use the included K-type thermocouple to measure suction line and liquid line temperatures. Switch between ℃ and ℉ with the SEL button.
Tracing Live Wires in Junction Boxes– Set the rotary switch to NCV, hold the meter close to the wire (with the bottom of the jaw contacting the insulation). The lamp and buzzer will activate when live voltage ≥ 90V AC is detected.
Bluetooth Data Logging– Install the \"Intelligent Meter\" APP on your phone, pair the meter, and start recording measurements. This is especially useful when you need to leave the meter on a live circuit and monitor readings from a safe distance or generate service reports for customers.
Safety & Important Notes
Always set the rotary switch to the correct position before each measurement.
Do not exceed the maximum input limits: 600V AC/DC between terminals and ground.
When measuring voltage above DC 60V or AC 30V, exercise extreme caution to avoid electric shock.
Keep your fingers behind the protection rings on the test leads and clamp jaw during measurement.
Turn the function switch to\"OFF\"after each use to conserve battery power.
If the low battery symbol appears on the display, replace both AAA batteries promptly.
For long-term storage, remove the batteries to prevent leakage damage.
Why Choose This Clamp Meter for Your HVAC Work?FeatureBenefitTrue RMSAccurate readings on variable frequency drives (VFDs) and non-sinusoidal waveformsTemperature + Clamp in OneNo need to carry separate tools for current and temperature checksBluetooth APPRecord and share data with customers or supervisors remotelyNCV with Lamp & BuzzerQuick and safe wire identification without contactCapacitance up to 60mFTest a wide range of motor capacitors found in commercial HVAC systemsCompact & LightweightEasy to carry in your tool bag or pocket during rooftop or crawlspace jobsWarranty & Support
This product comes with a standard manufacturer\'s warranty against defects in materials and workmanship. If you encounter any issues with setup, operation, or compatibility, please contact our customer support team directly.
For after-sales inquiries, please email us with the following information to ensure a fast response: Description of the Problem (photos or videos are highly recommended)
We are committed to resolving your concerns promptly and professionally.
Note
Product images and specifications are for reference only. Actual product may vary slightly due to ongoing improvements. Please refer to the physical unit for final details. The manufacturer reserves the right to update specifications without prior notice.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.