CircuPool EDGE-40 Salt Chlorine Generator Part Number:EDGE40
- power:Power: 1.7 lbs/day
- warranty:7 Year Limited Warranty
- capacity:40000 Gallons Max Capacity
- value-score:94.2
- salinity:2800 - 4500 ppm
Power: 1.7 lbs/day Manufacturer Warranty: 7 Year Limited* Manufacturer Max Capacity: 40000 Gallons* Complete Specs
Chlorine Output:
1.7 lbs /day
Manufacturer Warranty:
7 Years Limited*
Manufacturer Max Capacity:
40,000 gallons
Controls:
Digital - OLED Display Screen, LED Indicators
Salinity Range:
3000-4500 ppm
Salinity Test:
Yes - Low Salt
Self-Cleaning:
Yes, Reverse Polarity
Warranty Penalty for Self-Install:
No
Clear Cell:
Yes
Boost Mode:
Yes, 24 hours
Winter Mode:
Yes
Flow Sensor:
Yes, Integrated Flow Switch
O-Rings Included:
Yes
Unions Included:
Yes
Union Size:
2
Power Cord Length:
3\'
Cell Cord Length:
8\'
Cable Connection Type:
Plugin
Weight:
11 lbs
Rated Amperage (120V/240V):
1.8A / 0.9A
Weather / UV-Resistance:
Designed for Outdoor Installation and Operation
Controls
Equipped with a small, die-cast aluminum and moulded-plastic box, the CircuPool EDGE-40 Control Module features LED indicators and a touch-sensitive keypad. Each system comes with a tool-free mounting system and bracket that allows for easy install on any nearby wall or support.
Digital controls display the set chlorine percentage for output and power, while the keypad allows you to increase or decrease chlorine output, activate a boosted SuperCL mode, or check out the systems diagnostics.
Electrolytic Cell
The electrolytic cell for the CircuPool EDGE-40 unit is an inline unit with clear housing, containing built-in titanium electrode plates. At the inlet and outlet of each EDGE cell, there are threaded connections which allow for rapid removal or access for service or cell replacement.
The threaded connection will attach to included 2 plumbing unions, which can be glued directly to the existing PVC return-line. The clear housing makes it easy to view the chlorine generation or check the cell for routine cleaning or maintenance.
Parts CircuPool EDGE-40 systems come with: a cleaning cap, 2 threaded cell unions, Flow Switch and Temperature sensors, mounting system, assorted hardware, and a standard operator manual. Warranty Manufacturer 7 Year Limited Warranty for residential use. Most manufacturer chlorine generator warranties are pro-rated. All warranties offered are provided by the relative manufacturer and are limited to the terms and proration they provide. See manufacturer\'s documentation for a full description of warranty terms and conditions. Winter Mode: Larger pools or more demanding pools can stay clean with the help of the EDGE-40, with a maximum capacity of 40,000 gallons. Professional Installation Required: DON\'T
MISS THE
UPGRADE Description
The CircuPool EDGE 40 electronic salt chlorine generator is an advanced, fourth-generation salt pool system. The EDGE40 is designed to offer a balance of performance, simplicity, and value. The CircuPool EDGE series system works with your current pump and filter to maintain sparkling clear water every day, without having to buy & add chlorine. The EDGE40 salt system operates at very low salt levels, creating silky soft pool water for the ultimate swimming experience. Max capacity rating: 40,000 gallons.
Featuring a streamlined, modern design and improved technology, the CircuPool EDGE-40 salt generator is set up for worry-free operation. A digital switch-mode power supply automatically converts both 110V or 220V, making it easy to connect to your existing pump timer or power supply.
With a high performance titanium cell, the EDGE-40 is designed to effortlessly provide perfect blue water and a comfortable swim. If youre upgrading from an older model, the available adapter kit allows you to replace Hayward® Aqua Rite® and Pentair® IntelliChlor® systems without having to replumb.
- Made in America. Long Lifespan Titanium Cell, with industry-leading 7-Year Limited Warranty.
- 4th-Generation system, combining the best in advanced technology with reliable, simple operation.
- Energy-efficient. Digital power supply minimizes heat and protects electronics.
- Worry-free operation and easy maintenance with included Cleaning Cap.
- CircuPool products are backed by USA-Based Expert Support & USA-Based Factory Warranty
*Please note CircuPool products are not affiliated with Hayward Industries, Inc or Pentair. The use of such trademarks herein is for informational purposes only, and the product(s) are not those of Hayward Industries Inc. or Pentair, but rather are simply compatible with the referenced Hayward/Pentair product.
Resources
Additional Images
Reviews Great Generator I cut old system out put this in line with one 2inch extra pipe approx 6 inches in legnth, and two couplings. Took me approx 39 min because of space. Then electronics were plug and play to system, an hard wire power direct. I recommend the UV system also, for absolute crystal clear water. Aftee two days I checked the water and it was perfect. No need to get technical, because Circupool has there systems perfected. Personally I believe they are the best currentmy in the pool industry. If you are in SC look to Lee OnAWhim For your Circupool needs. Reviewed by:Chris Lee from Chapin. on 9/27/2019 5/5 Finally, an alternative. After 20+ years of running product Z\'s built-for-obsolescence salt generators, I threw in the proverbial towel and went searching for a better alternative to replacing an expensive cell every year or so. Enter CircuPool. I asked a few questions on their site tech support and every question was promptly answered by a real person with a name! Wonderful start! So for a little more than yet another cell replacement, I purchased an Edge45. Replacement was a little tricky, since the Edge curiously doesn\'t come with the 16\' cords I was used to. The Edge has 8\' cords for the flow sensor and cell power, and a 3\' main power cord (not a problem there). Hook up into my automation circuit box was a snap with an electrician\'s guidance (I\'m a retired pool pro). From there, I rerouted my return line to accommodate the 8\' reach of the Edge cords. The Edge flow sensor and cell comes with handy connector ports that you just plug the terminals on the cord into. It\'s a little puzzling why Circupool doesn\'t offer an similarly connection-terminal equipped extension cord as an option - it would seem to make to sense to me and open up the usage to many who\'s equipment is situated away from the electric source. The unit functions perfectly so far, we\'ll see how long the 7 year limited warranty cell lasts, but that is a hefty warranty for this type of product. The electronics are touted as advanced technology and the compact power box reflects that claim. No more interface with the automation display, but also, no more \"General Fault\" indications!I highly recommend this easily available product as a much-needed alternative to the Big 3 systems and their limited distribution policies. If this works out, I\'ll be back for the Ph controller!Summary: 4 stars for a limited length power cord that should be an easy fix. 5 stars for the excellent customer support and otherwise product design, which includes a see-through cell and cell-cleaning cap. Reviewed by:Jack from Port St. Lucie. on 1/21/2020 4/5 Much more modern and predictable This is my second salt system. I replaced a Swimpure Plus that I had for about four years. The first thing that I noticed is that it is much more modern electronics. It makes the old salt system seem like an old brick cell phone, and its much more consistent and predictable. The old one would always give false salt readings and I had to take the cell apart every other week. This has been smooth sailing, and is noticably more powerful able to keep the chlorine level up even when my kids track lots of gunk in the pool. Reviewed by:Cathy Higgs from Delray Beach, FL. on 4/17/2019 5/5 Wow, Love this thing! I was one of the first people I know to get a salt pool, about 15 years ago...it was a ClevaChlor and it finally died so I just bought this to replace it. It\'s only been a short time but this machine is obviously light years ahead of what I had. It weighs a fraction of the one I ripped out and it stays cool even when turned up to 100%. I also like that it works in such a wide range of salinity so no more of those worries. I have to mention also how neat it looks with the violet light bar around the edge; I take my friends out back at night just to show it off! Reviewed by:D. Abitano from Key West. on 4/18/2019 5/5 Edge 40 Chlorine Generator My old Circupool RJ 20 was starting to give me problems - over salt light alternately on and then off, not all message lettering fully displayed. I had the option of returning unit to be analyzed and repaired or purchase a newer model. Being not one to spend at least half the cost on a new something or other I will usually buy new, which is why I bought the new Edge 40 that was recommended to me by Ali. Ali also managed to get me a loyalty discount as a repeat customer (thanks Ali!). I was getting a new state of the art chlorine generator, advanced electronics being kept cooler, and not to mention a new warranty. The new unit was easy to install, can run on either 110v or 220v, and is producing more chlorine than ever allowing me to run the unit less, which should prolong the life of the salt cell. I can only hope the unit will last me a long time. I highly recommend this unit to anyone considering the purchase of a new generator. Reviewed by:Mike Buczek from Harrisburg, NC. on 7/28/2019 5/5 Q & A Q:What is the difference between the CircuPool EDGE-40 or the CircuPool RJ-45? I have a 26,000 gal in ground salt water pool with a Pentair IC40 that is fast approaching its life expectancy and would like to replace it with a quality product that will last longer and provide better service. Asked by:Scott - 5/20/2019 A:Both would be an excellent option to upgrade to. The main differences would be that the EDGE40 is the latest model that will give you the most modern streamlined system with more warranty protection, more features that make it easier to use, a more compact design, plus all the benefits of the RJ45 like powerful chlorine output and long lifespan cells. Answer provided by: Discount Salt Pool (5/22/2019) Q:I know the Core is designed to be plugged into an outlet. Where I am mounting my Edge40 I have 120V off the same power source as the pump, any disadvantage to not using 220V off the pump breaker? Its a variable speed pump and I never turn the breaker off anyway Asked by:Mark Ayash - 3/9/2020 A:There is no performance difference if the system uses 110 or 220. The EDGE also can auto-convert the voltage, so you don\'t need to reconfigure anything on the unit. Answer provided by: Nathan (3/9/2020) Q:Is this weather proof to be installed outdoors? Asked by:Chris - 4/17/2020 A:Yes, this can be mounted directly to the wall outdoors, no additional protection is necessary. Answer provided by: Discount Salt Pool (4/20/2020) Q:Where would I connect edge 40 power to on a variable speed intelliflo pump that has internal timer? Asked by:Kevin - 3/29/2020 A:The best way to coordinate any salt system with a programmable variable speed pump is to power it with an external timer which is set to run at the same times as your pump\'s internal timer. Additionally, the system utilizes a flow switch which synchronizes its operation with the water starting & stopping; if there is no way to use an external timer, the flow switch ensures that the salt system only runs with the water running. Answer provided by: Matt (3/30/2020) Q:How many amps does this draw? Asked by:me - 10/29/2019 A:It only pulls about 2A. Salt systems are designed to run on the same circuit as a pump; they are low power usage. Answer provided by: Nathan (10/30/2019) Q:Is there a bypass pipe for the Edge40? I am very interested in buying one Asked by:Mark Ayash - 1/31/2020 A:Yes, you can see that item here: https://www.discountsaltpool.com[link removed by ] Answer provided by: Discount Salt Pool (2/3/2020) Q:For the chlorine power level, there are 8 bars, what is the percentage of power that each bar represents? Asked by:Peter - 7/8/2019 A:It would be roughly about 12% increments. Answer provided by: Nathan (7/9/2019) Q:Can the edge 40 be used on a 30ft above ground pool? Asked by:Donald R Salvail - 2/17/2020 A:If your pool is about 4.5\' deep, that would likely put you at about 24,000 gallons. The EDGE40 should be a great choice for your size pool. It can work on both in ground and above ground pools. Answer provided by: Nathan (2/18/2020) Q:I have an Aquqlink 2.0 system. the power to the pump is linked thru low voltage for operation. How do I install to operate with this system . Asked by:Dan - 5/11/2020 A:If you just directly hook this system to power, its included \"flow switch\" activates/deactivates it when your pump starts/stops. Answer provided by: John (5/11/2020) Q:I have a Jandy 1400 would this be a direct replacement or would I need to do some plumbing? Asked by:Kevin - 5/25/2020 A:Unfortunately, nothing is the same length or has the same threads as a Jandy Aquapure. You would want to cut it out and plumb the new system in. Answer provided by: Nathan (5/25/2020)
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.