Here is a Hammer Springfor your CVA Optima, Beartooth or Wolf.
This is a stock Photo. Your item will be the same.
Best I can do is: from the center of the hole to the end with the 90 degree is 13/16\". From the center of the hole to the end of the straight arm is 1 1/4\". The 2 arms are 1 3/8\" apart at the ends. The coil is 1/3\" wide. The hole in the coil is .226 across.
Please ask any questions before offerding or buying.
In order to make sure this part fits your gun check out the picture of the trigger and make sure your trigger looks like the one in the picture. Pay close attention to where the 3 pins are located. Sometimes I also have all the internal parts listed for the trigger.
NOTE: This part goes on a muzzleloader, blackpowder gun.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.