AUTOOL CT400 Fuel Injector Cleaner Tester utilises the latest unique GDI injector drive technology. With easy one-button operation mode equipped with multiple voltages, the cleaning process is highly automated, which greatly reduces cleaning time and improves work efficiency. It works with most injectors on the market and is compatible with brands such as Mercedes-Benz, BMW, Audi, Ford and Porsche. Its six-cylinder design allows multiple injectors to be tested simultaneously. Offering multi-voltage options to support GDI, Piezo, EFI, FEI, and conventional fuel injectors, the unit is designed to provide automotive service technicians with an efficient and accurate injector cleaning solution that will help restore vehicles to peak performance.Why do you need the AUTOOL CT400 Injector Cleaning Tester?
The machine\'s three-voltage drive is the strongest advantage. The CT400 offers three voltage outputs 12V, 70V and 120V to drive the leading GDI high-pressure injectors on the market. Intelligent matching automatically recognizes the voltage of the injector to avoid damage to the equipment or poor cleaning effect due to voltage mismatch. This feature greatly reduces maintenance costs. For example, when cleaning the six GDI injectors on a BMW 740, users can save tens of thousands of dollars by continuing to use the injectors after the cleaning is complete rather than replacing them outright.
AUTOOL CT400 GDI Fuel Injector Cleaner and Tester Features
✅ Ultrasonic Cleaning, Deep Carbon Removal: Built-in high-frequency ultrasonic cleaning tank, through the combination of pulse signal and ultrasonic vibration, it is able to completely remove carbon and impurities inside the fuel injector. This type of cleaning is more efficient compared to traditional bottle cleaning, and is especially suitable for stubborn deposits caused by low-speed and idling conditions in urban transportation.
✅ Multi-voltage selection: adjustable voltage output (12V, 70V, 120V). It intelligently recognizes the required drive voltage for GDI injectors to prevent damage from incorrect settings while avoiding oil fill or alarm signals.
✅ Supported Models: Supports major automakers: Fit for Audi, Mercedes-Benz, BMW, Chevrolet, Chrysler, Fiat, GM, Honda, Hyundai, Jaguar, Kia, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Toyota, etc.
✅ Adaptable to a variety of injectors: support for ordinary injectors, GDI, EFI, FSI FEI Piezo and other types, covering the injectors of the core brands of cars in Europe, America and Asia.
✅ Intelligent cooling system: AUTOO CT400 nozzle inspection cleaning machine is equipped with a cooling fan and thermal protection, the power of 60 w. In the process of using the temperature is too high when the cooling system will be intelligently activated, to avoid damage to the machine due to overheating, so as to extend the service life of the machine!
✅ Warm tips:The product supports 99% of injector cleaning and testing. However, for diesel injectors, it only supports cleaning, not testing!
It is an expert in Injector solutions, featuring 12 injector-specific functions
01. Ultrasonic cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors.
02. Idle speed test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector.
03. Medium speed test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector.
04. High-speed test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector.
05. Acceleration test: Simulate the acceleration state of the car and test the performance of the fuel injector.
06. Shift speed test: Simulate the shifting state of the car and test the working performance of the fuel injector.
07. Leakage test: Test the sealing condition of the fuel injector.
08. Idle Fuel Injecting Amount Test: Simulate the engine idling state and test the spraying performance of the fuel injector.
09. Middle-speed Fuel Injecting Amount Test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector.
10. High-speed Fuel Injecting Amount Test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector.
11. Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector).
12. No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters.
6-Cylinder & Draining Ports DesignAUTOOL CT400 can test and clean six injectors simultaneously to greatly improve efficiency; it also has special control valves for cleaning solution discharge and test fluid recovery. Simple and easy to understand operation for efficient processing.Multi Voltage Selection:
AUTOOL CT400 GDI Fuel Injector 6-cylinder Cleaner and Tester designs with various types of voltage output (12V, 70V & 120V) to be selected to adapt for different types of injector testing.Ultrasonic cleaning function
It works by accurately transmitting ultrasonic vibration signals to the injectors via a pulse signal cable. These high-frequency vibrations trigger strong resonance of the carbon inside the injectors, resulting in a deeper and more thorough cleaning.Various Parts equipped&Portable DrawerIt is equipped with a diverse range of injector accessories designed to meet a variety of different needs. The bottom of the body is cleverly designed with a portable drawer for storing various parts and easy access for efficient management.Smart Control PanelProvides function options, eye-catching display of working figures, flexible GDI pressure adjustment options, convenient timing configuration settings, and a push-button operation panel that combines multiple controls in one.High pressure direct injection injector cleaning and testing
The AUTOOL CT400 cleans and tests not only normal injectors, but also GDI EFI FSI high-pressure direct injection injectors such as Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection injectors
How to choose cleaning fluid?
Cleaning fluid is used to clean deposits (such as carbon deposits) on fuel injectors, and it is usually highly corrosive and flammable. In order to achieve the best test effect, it is recommended to use professional injector ultrasonic cleaning fluid.
How to choose test fluid?
The test fluid is used to test and judge whether the performance of the fuel injector is in good condition. It is a colorless and transparent liquid with no irritating odor, non-corrosive, and not easy to emit. Its function is to simulate various working states of the fuel injector as a medium. In order to achieve the best test effect, it is recommended to use professional automotive injector test fluids. If it is not available locally, as an alternative, it\'s recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the test fluid.
Note:
1. Cleaning fluid is placed in the ultrasonic box for engine carbon cleaning.
2. Test fluid or industrial alcohol is placed in the glass tube for injector testing.
3.Please do not confuse these 2 liquids and do not add other liquids. If you are not sure if the liquid is correct, please contact me in advance with pictures
Packing List:
1pc * AUTOOL CT400 Fuel Injector Cleaner Tester Main Unit and 1pc * Funnel(for adding test fluid);
1pc * Ultrasonic Cleaning Bracket (for placing the injectors during cleaning)
1pc * Drain Valves(For recovering the cleaning fluid );
6pcs* injector sealing gaskets (used to seal the conjunction between fuel injector and oil separator)
4pcs * Fixing rods(For fixing the oil separator) and 4pcs * Fixing Nuts(For fixing the oil separator);
6pcs* Top inlet connectors (for connecting the top of the injector and the oil separator hole)
6pcs* Top inlet connectors φ16mm (for connecting the top of the injector and the oil separator hole)
6pcs * Conical top inlet connectors φ10.5mm&13.6mm (for connecting the top of the injector and the oil separator hole)
6pcs *Adapter cables(For transferring the pulse signal line connector, instead of connecting the injector signal input pin)
1pc * Power Cable(for connecting power supply) and 1pc * Oil Separator(Distribution device for outputting pressurized test fluid to the injectors);
6pcs* Fit For BMW special adapter(special adapter fit for BMW 7 series GDI injector to connect oil separator)
6pcs* Special injector gaskets(for auxiliary installation of special fuel injectors)
5pcs * Special plugs for oil separator(used to block the holes on the oil separator)
1pc * Ultrasonic Cleaning Cover(for keeping the cleaning bath clean)
1pc * User Manual(Instructions)
MORE PRODUCTSMORE PRODUCTSMORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.