CP2102 MICRO USB to UART TTL Module 6Pin Replace FT232 Serial Converter STC USA
$9.99

**US SELLER**
applications:
The CP2102 is a universal serial bridge — here\'s what it\'s good for:
Microcontrollers & Dev Boards:
Arduino (flash & debug)
ESP32 / ESP8266 (flash firmware)
STM32 (serial debug)
Raspberry Pi (serial console)
NodeMCU
Embedded Systems:
GPS modules (read NMEA data)
GSM/LTE modems (AT commands)
Bluetooth modules (HC-05, HC-06)
CAN bus adapters
Industrial sensors
Automotive / ECU:
ECU serial diagnostics
IMMO programmers
KLine communication bridges
Data loggers
Networking / Routers:
Serial console access to routers/switches
Cisco, MikroTik, Force10 console port access ← useful for your cluster
OpenWRT devices
General:
Any device with a UART/TTL serial port
3.3V and 5V logic level support
Works on Windows, Linux, Mac
Plug and play driver (Silicon Labs CP210x)
CP2102:
More stable drivers on Windows 11
Less issues than FT232

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.