Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

CMP 170HX PWMVID Hardware Unlocker Fuzzing Development Board v2

CMP 170HX PWMVID Hardware Unlocker Fuzzing Development Board v2
$200.00

Buy Now

CMP 170HX PWMVID Hardware Unlocker Fuzzing Development Board (intl ship)
NOTE: this is a mockup but the boards are currently being produced in china! (this process takes about 1.5-2 weeks)
NOTE TO ALL BUYERS: this is an ADVANCED DEVICE and requires experience soldering / using signal monitoring tools. The process has been verified but the means of using this to unlock are different for every spec of cmp170hx. This tool makes it possible to \"voltage glitch\" nvidia GPUs but by no means is a guarantee. Any experimentation with your gpu is done AT YOUR OWN RISK! I cannot guarantee and DO NOT make guarantees that this device or high-level instructions will unlock your cmp170hx.

Unlock the A100 hiding inside your CMP 170HX.

The NVIDIA CMP 170HX ships as a crippled GA100 — the same silicon as the A100 80GB, but fused down to a fraction of its potential. This development board applies a previously undiscovered hardware-level unlock using voltage fault injection, going far beyond what any software tool can reach.

What software can’t do, hardware can

Software unlockers (like cmpunlocker) get you partway: roughly 64GB of framebuffer, but you stay stuck at 70 SMs and PCIe Gen2 — around 0.69× the FP16 throughput of a retail A100.

This board enables further capabilities (results may vary):

  • ~80GB VRAM restored on most cards (vs. the stock 8–10GB exposed)
  • ~120–126 SMs unlocked, up from the stock 70
  • PCIe Gen3/Gen4 training — Gen4 x16 can match a retail A100 PCIe card
  • NVLink, ECC, MIG paths opened up
  • FP16 FMA measured at ~85 TFLOP/s — about 1.18× a retail A100

Runs real workloads: synthetic memory tests, vLLM, and SGLang have all been validated on unlocked cards.

⏱️ Processing / lead time

Orders are made to order. The processing time shown at checkout reflects our PCB production timeline — each board is fabricated in a batch run, not pulled from a shelf. Please factor this fabrication window into your delivery expectations.

📦 What’s in the box / what’s not
  • ✅ The glitcher development board (STM32G4-based)
  • ✅ Printed/digital step-by-step unlock guide included
  • ❌ USB cable NOT included — source your own
  • 🔌 Probes sold separately — add-on probe set available as a separate purchase
How it works (high level)
  1. Attach the taps to the card’s test points and remove the specified 0Ω resistor to break the PWMVID path.
  2. Connect the board and power-cycle the card to reach the glitch window.
  3. Run the glitching campaign — the board injects the voltage fault and watches for the target boot state.
  4. Once the state is hit, the tool calculates your die-specific values and commits the unlock.
  5. Verify the restored framebuffer, SMs, and PCIe link.

Full details are in the included guide.

⚠️ Please read before buying

This is an advanced hardware project for experienced users. Results are die-specific and vary per card — glitching time has ranged from ~1 to 48 hours, and not every card reaches the same final state. Some outcomes can leave a card temporarily or permanently unusable, and fuse-level changes may be irreversible. You’ll need basic soldering skills (fine-wire tapping, 0402 rework) and your own host setup. Sold as a development/research tool for hardware you own.


per \'s \"pre selling\" rules the shipping / handling time for these boards is 10 days

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design