CMP 170HX Hardware Unlocker — “Kate-Based” Voltage-Glitch Development Board
NOTE: this is a mockup but the boards are currently being produced in china! (this process takes about 1.5-2 weeks)
Unlock the A100 hiding inside your CMP 170HX.
The NVIDIA CMP 170HX ships as a crippled GA100 — the same silicon as the A100 80GB, but fused down to a fraction of its potential. This development board applies a previously undiscovered hardware-level unlock using voltage fault injection, going far beyond what any software tool can reach.
What software can’t do, hardware can
Software unlockers (like cmpunlocker) get you partway: roughly 64GB of framebuffer, but you stay stuck at 70 SMs and PCIe Gen2 — around 0.69× the FP16 throughput of a retail A100.
This board takes you across the last mile:
- ~80GB framebuffer restored on most cards (vs. the stock 8–10GB exposed)
- ~120–126 SMs unlocked, up from the stock 70
- PCIe Gen3/Gen4 training — Gen4 x16 can match a retail A100 PCIe card
- NVLink, ECC, MIG paths opened up
- FP16 FMA measured at ~85 TFLOP/s — about 1.18× a retail A100
Runs real workloads: synthetic memory tests, vLLM, and SGLang have all been validated on unlocked cards.
⏱️ Processing / lead time
Orders are made to order. The processing time shown at checkout reflects our PCB production timeline — each board is fabricated in a batch run, not pulled from a shelf. Please factor this fabrication window into your delivery expectations.
📦 What’s in the box / what’s not
- ✅ The glitcher development board (STM32G4-based)
- ✅ Printed/digital step-by-step unlock guide included
- ❌ USB cable NOT included — source your own
- 🔌 Probes sold separately — add-on probe set available as a separate purchase
How it works (high level)
- Attach the taps to the card’s test points and remove the specified 0Ω resistor to break the PWMVID path.
- Connect the board and power-cycle the card to reach the glitch window.
- Run the glitching campaign — the board injects the voltage fault and watches for the target boot state.
- Once the state is hit, the tool calculates your die-specific values and commits the unlock.
- Verify the restored framebuffer, SMs, and PCIe link.
Full details are in the included guide.
⚠️ Please read before buying
This is an advanced hardware project for experienced users. Results are die-specific and vary per card — glitching time has ranged from ~1 to 48 hours, and not every card reaches the same final state. Some outcomes can leave a card temporarily or permanently unusable, and fuse-level changes may be irreversible. You’ll need basic soldering skills (fine-wire tapping, 0402 rework) and your own host setup. Sold as a development/research tool for hardware you own.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.