Fast shipping to USA by UPS! Usually only takes 3 to 7 working days!
CC65 + Head + 1008C 8CH USB Auto Scope/DAQ/8CH ProgramGenerator Oscilloscope
Software Language: English, German.
Software Support: Windows 7/ 8 /10
Package includes:
1008C 8CH AutoScope/DAQ/8CH Programmable Generator*1
HT30A Hantek BNC toDual Banana Head Test Line*3
CC-65A AC/DC20KHzcurrent clamp *1
HT201 300V 20:1 PassiveAttenuator*1
Secondary ignitionprobe(HT25)*1
Back pinning probe *3sets(5pcs)
HT18A AlligatorClip*3
Bag(see picture)*1
User manual*1
USB cable*1
CD(driver)*1
Software support: Windows 7, Windows 8,Windows 10
Cost-effective 8 channels oscilloscopefor vehicle testing; 2.4MSa/s, 12bits; DAQ card function; 8 channelsprogrammable generator which can analog signals of crankshaft, camshaft etc.
Vehicle Testing:
- First Diagnosis: Intake manifold vacuum & ignition, Petrol fumesadjusting valve vacuum & ignition, Idle exhaust ignition, Startingexhaust ignition.
- Ignition: primary and secondary.
- Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambdasensor, Throttle position.
- Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CANbus LH long time acquisition, LIN bus.
- Performer: Petrol/Diesel.
- Starter and charging circuits.
Oscilloscope:
- 8 channels oscilloscope, 2.4MSa/s real time sampling rate.
- 12 bits vertical resolution, spectrum analysis function.
8 channels programmable generator.Can analog signals of crankshaft, camshaft etc.
Others:
- USB 2.0 interface plug and play, and no need extra power supply;
- More than 20 types of automatic testing function, a similar interfacewith benchtop oscilloscope, easy to use;
- Software support: Windows 7, Windows 8,Windows 10
Oscilloscope Mode
Vertical System
Analog Channel
8
Input Impedance
Resistance: 1MΩ
Input Sensitivity
10mV/div to 5V/div
Input Coupling
DC
Resolution
12 bits
Horizontal System
Memory Depth
4K
Max. Input
400V (DC+AC Peak)
Real-Time Sampling Rate
2.4MSa/s
Time Base Range
1ns/div to20000s/div(1-2-5sequences)
Time Base Precision
±50ppm
Trigger System
Time Base Range
1ns/div to20000s/div(1-2-5sequences)
Time Base Precision
±50ppm
Trigger Source
CH1, CH2, CH3, CH4, CH5,CH6, CH7, CH8
Trigger Mode
Edge
X-Y Mode
X-Axis Input
CH1
Y-Axis Input
CH2
Cursors and Measurement
Voltage Measurement
Vpp, Vamp, Vmax, Vmin, Vtop,Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot
Time Measurement
Frequency, Period, RiseTime, Fall Time, Positive Width, Negative Width, Duty Cycle
Cursors Measurement
Horizontal ,Vertical, Track,Auto Measure Modes
Waveform Signal Process
+,- , x,÷, FFT, Invert
Voltage Range
10mV to 5V/div @ x 1 probe
100mV to 50V/div @ x 10 probe
10V to 5000V/div @ x 1000 probe
100V to 50000V/div @ x 10000 probe
200mV to 100V/div @ 20:1
Current Range
100mA to50.0A/div @CC65(20A)
1000mA to500.0A/div @ CC65(65A)
1A to100.0A/div @ CC650(60A)
1A to200.0A/div @CC1100(100A)
10A to2000.0A/div @CC1100(1100A)
FFT
Rectangular, Hanning,Hamming, Blackman Window
Math
Addition, subtraction,multiplication, division
Programmable Generator
Channel
8
Output Level
LVTTL
Frequency Range
0-250kHz
Interface
USB 2.0
Power
No need extra power supply
General
Size
185 * 150 * 27mm / 7.3 * 5.9* 1.06in
Weight
319g / 11.28oz
Package Size
23 * 17 * 7.5cm / 9.05 * 6.7* 2.95in (L * W * H)
Package Weight
915g / 32.29oz
Connection method:
1 . Connect the BNC end of the A test line tothe CH1 channel of the oscilloscope, the positive pole is inserted into thesignal line terminal of the camshaft sensor through the probe, and the negativepole is grounded with the alligator clip;
2 . Connect the BNC end of the B test line to the CH2channel of the oscilloscope, insert the positive pole through the probe intothe positive terminal of the crank signal line, and ground the negativecrocodile clip;
3. Turn on the CC65 current clamp power supply,put it in the 1mv/10ma file, clamp the positive electrode of the fuel injectorand connect it to the oscilloscope CH3;
4. Connect the HT30 test line BNC end to the HT201attenuator and connect it to the oscilloscope channel CH4. The probe positiveconnection probe detects the ignition coil ground terminal.
Package includes:
1008C 8CH AutoScope/DAQ/8CH Programmable Generator*1
HT30A Hantek BNC toDual Banana Head Test Line*3
CC-65A AC/DC20KHzcurrent clamp *1
HT201 300V 20:1 PassiveAttenuator*1
Secondary ignitionprobe(HT25)*1
Back pinning probe *3sets(5pcs)
HT18A AlligatorClip*3
Bag(see picture)*1
User manual*1
USB cable*1
CD(driver)*1
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.